Page 5 of 5
Re: Harley Eagle Plaque
Posted: Wed Dec 09, 2015 10:10 pm
by vfauto
Could someone provide instructions on how to use esp files with Aspire? I am feeling stupid.
Re: Harley Eagle Plaque
Posted: Wed Dec 09, 2015 11:51 pm
by garylmast
Could someone provide instructions on how to use esp files with Aspire? I am feeling stupid.
import the file using the second to last folder under File Operations.
Re: Harley Eagle Plaque
Posted: Thu Dec 10, 2015 2:52 am
by DMcDonald
Boomer could you email me the files for the ones with the bikes on them. Thank you
dmcdonald15@hotmail.com
Re: Harley Eagle Plaque
Posted: Thu Dec 10, 2015 1:53 pm
by vfauto
I would love to get any crv3d file for Harley and Indian e-mailed to me as well.
Thank You
frank@vfauto.com
Re: Harley Eagle Plaque
Posted: Fri Dec 11, 2015 9:18 pm
by DMcDonald
Got the files. Thank you going to run some tomorrow.
Re: Harley Eagle Plaque
Posted: Fri Dec 11, 2015 10:52 pm
by vfauto
Thanks for the files.
Re: Harley Eagle Plaque
Posted: Sat Dec 12, 2015 8:53 am
by antennasDIY
Include me too please
antennas@yahoo.com
Thanks so much.
Re: Harley Eagle Plaque
Posted: Tue Dec 22, 2015 11:43 pm
by hynes143
BOOMER52, Question.
Have you carved the vintage Harley bike? I tried in MDF and get allot of tear out (lines so close) wondering if you did and the bit you used / depth / etc....
I used a V30 at .04 depth, still no luck.
Thank You
Re: Harley Eagle Plaque
Posted: Wed Dec 23, 2015 2:09 am
by Daniel S
Thanks for the files... my son a Harley lover and owner, will be very happy and you will have made me Dad for the day every time he looks at them.
Gpa Dan
Re: Harley Eagle Plaque
Posted: Wed Dec 23, 2015 4:19 pm
by BOOMER52
hynes143 wrote:BOOMER52, Question.
Have you carved the vintage Harley bike? I tried in MDF and get allot of tear out (lines so close) wondering if you did and the bit you used / depth / etc....
I used a V30 at .04 depth, still no luck.
Thank You
I've carved that file. All the vectors were v-carved with no depth limit... and I carved it in Melamine which gave me a poor man's sepia tone for a finished appearance. My sign size was 20X24 and I used a 60 v-bit for the cycle vectors... 90 deg v-bit everything else.
I've never attempted to machine these PhotoV-Carve like images in MDF. I suppose the tear out is material related and possibly MDF doesn't have a cohesive enough structure. Possibly a tight grained wood such as hard maple or if not wood then Corian for a smaller sign.
Re: Harley Eagle Plaque
Posted: Thu Dec 24, 2015 12:58 pm
by hynes143
Perfect - Thank You Boomer52 for the additional info, I will re try again soon.
Thank You
Re: Harley Eagle Plaque
Posted: Fri May 19, 2017 4:55 pm
by tadthies
Boomer, could you email me the crv3d files for aspire for the HD designs?
Thanks
tadthies@gmail.com