Butterfly Box
- llwood
- Vectric Wizard
- Posts: 392
- Joined: Sun Nov 18, 2012 5:07 pm
- Model of CNC Machine: Legacy Maverick
- Location: Dillsburg, PA
- Contact:
Re: Butterfly Box
These three files make up the larger butterfly box, the one that's 11.5x7.5.
- Attachments
-
- Butterfly box base.crv
- Base
- (967.5 KiB) Downloaded 1081 times
-
- Butterfly box lid.crv
- The two lids are cut from one piece
- (1.15 MiB) Downloaded 952 times
-
- Three-way Hinge.crv
- Three way hinge
- (662 KiB) Downloaded 957 times
- llwood
- Vectric Wizard
- Posts: 392
- Joined: Sun Nov 18, 2012 5:07 pm
- Model of CNC Machine: Legacy Maverick
- Location: Dillsburg, PA
- Contact:
Re: Butterfly Box
Here's a smaller version, about 8x5. I also changed the way the hinge pieces attach to the base. The larger version has a slot from one end to the other. Two small pieces of wood, about 2x.25x.25 were used to fill in the groove between the hinge pieces. In this version, I instead cut 3 pockets (with fillets) that the hinge pieces fit into. We haven't cut this version or assembled it yet, so I am not sure how it will work, but I think this will make it easier to glue.
The hinge pieces are smaller also, shrunk from 1/2" to 3/8".
Enjoy!
--Andy
The hinge pieces are smaller also, shrunk from 1/2" to 3/8".
Enjoy!
--Andy
- Attachments
-
- Butterfly box base smaller.crv
- Smaller version, base
- (873 KiB) Downloaded 846 times
-
- Butterfly box lid smaller.crv
- Smaller version, lids
- (825.5 KiB) Downloaded 793 times
-
- Three-way Hinge smaller.crv
- Smaller version, hinge
- (493 KiB) Downloaded 831 times
-
- Vectric Craftsman
- Posts: 193
- Joined: Sun Feb 22, 2015 3:08 am
- Model of CNC Machine: Shark
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Butterfly Box
Thank you VERY much Andy!
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- mikeacg
- Vectric Wizard
- Posts: 659
- Joined: Sun Nov 02, 2008 10:53 pm
- Model of CNC Machine: Camaster Stinger, Sidewinder, SB 4x4
- Location: Newberry, MI
- Contact:
Re: Butterfly Box
Very generous Andy! I don't know when I will get a chance to try them out but wanted to be sure I said Thank You in case it takes me a while to get at them. I appreciate it!
Mike
Mike
- bill565
- Vectric Craftsman
- Posts: 116
- Joined: Sat May 10, 2008 4:58 pm
- Model of CNC Machine: One of those "Practical"4x4s
- Location: Jafrey New Hampshire
- Contact:
Re: Butterfly Box
Thank you for the generosity. I will give it a go somewhere in the future when once the summer heat forces me to stay indoors.
Bill
Bill
Save the Whales, Collect the Whole Set
http://www.bcnc-fab.com
http://www.bcnc-fab.com
Re: Butterfly Box
Thank you for your great project
-
- Vectric Craftsman
- Posts: 135
- Joined: Tue Jun 05, 2012 12:45 am
- Model of CNC Machine: Zenbot 2448
- Location: Belpre Ohio
Re: Butterfly Box
Andy, Thanks so much.
- Bill
- Bill
-
- Posts: 28
- Joined: Wed Dec 28, 2011 11:52 pm
- Model of CNC Machine: CNC Shark HD520
- Location: Charlotte, NC
Re: Butterfly Box
Thank you Andy for the files, looking forward to cutting these out for my granddaughter.
Colin
Colin
-
- Vectric Craftsman
- Posts: 260
- Joined: Tue Mar 11, 2014 6:12 pm
- Model of CNC Machine: salecnc XJ1224
- Location: Auckland New Zealand
Re: Butterfly Box
it is very nice of you to post your files, it is a very neat design.
thank you.
regards
Brian
thank you.
regards
Brian
- mtylerfl
- Vectric Archimage
- Posts: 5892
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Butterfly Box
I love this box! (excellent overall design, hinges, and so on)
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- zeeway
- Vectric Wizard
- Posts: 3157
- Joined: Thu Feb 11, 2010 9:24 pm
- Model of CNC Machine: Self-built
- Location: SC, USA
Re: Butterfly Box
Beautiful design. Thanks.
Angie
Angie
Re: Butterfly Box
Hi Andy
I don't have the latest version of V carve (i have 7.0), however, I believe I can make the box. But can you enlighten me on how you made the hinge? Nice design, my daughter will love it!
Mick
I don't have the latest version of V carve (i have 7.0), however, I believe I can make the box. But can you enlighten me on how you made the hinge? Nice design, my daughter will love it!
Mick