Cupboard Door Design

An area to upload images of pieces cut using VCarve Pro
Post Reply
Jason Marsha
Vectric Craftsman
Posts: 175
Joined: Thu Oct 13, 2005 11:28 pm

Cupboard Door Design

Post by Jason Marsha »

I cut this design into this door in about 21 mins using a 3/4" 90 deg bit at 1016mm/min (40" min). The door panel is 320mm(12.6") by 396mm(15.6").
I combined two styles of dingbats and after some rotating the design appeared.

Jason

Jason Marsha
Vectric Craftsman
Posts: 175
Joined: Thu Oct 13, 2005 11:28 pm

Post by Jason Marsha »

Here is the crv file

Post Reply