Wine Glass Holders

Post by **blmac5** » Wed Dec 10, 2014 7:37 pm

Nice glass holders Andy, should look good painted.

Bobby
Louisiana

Post by **pops1964** » Thu Dec 11, 2014 1:08 pm

Bobby nice job. And I like the coffee idea always good to have unique idea's in the pocket . Thanks pop's

Post by **blmac5** » Tue Dec 16, 2014 4:15 am

I recieved an email notification that I had a PM from "Lameiii" concerning the wine glass holders but I don't have access to PM's. How do I go about getting this? If "Lameiii" sees this post, I can't read your PM.

Bobby
Louisiana

Post by **woody53** » Sun Dec 21, 2014 7:52 pm

Had to try the wine glass holders. Was thinking would be nice to have on the wedding table for bride and groom. Alot of ideas, Thanks Bobby.

Post by **blmac5** » Sun Dec 21, 2014 9:25 pm

Nice job Woody, bride and groom should be very pleased.

Bobby
Louisiana

Post by **antennasDIY** » Wed Feb 11, 2015 5:34 pm

Very nice! What thickness are the last ones?

Post by **antennasDIY** » Sat Feb 14, 2015 9:40 pm

Well here is my attempt. It appears to be carved deeper on the top than the bottom. Must need to resurface teh spoil board. Hmmm..

Anyway I also had re drill the hole in the middle it came out too small. Should I have gone outside the vector instead of inside? (I guess so)

But like anything i learned a lot taking a crack at it.

Post by **Mike-S** » Sun Feb 15, 2015 12:57 am

Here's another variation you could try.
3D banner with V-carved name.

Post by **tatinc2000** » Sun Feb 15, 2015 11:50 pm

Here is mine.

Post by **antennasDIY** » Mon Feb 16, 2015 4:31 am

Hey tatinc2000, nice work. I like those a lot. I think I'll have a go at making one of those as well. Thanks for showing it to us.

Post by **blmac5** » Tue Feb 17, 2015 7:04 pm

Very nice designs!!

Bobby

Post by **antennasDIY** » Fri Feb 20, 2015 12:47 am

llwood wrote:Really love the coffee grounds idea. Plan to try that sometime.

But for now we did another variation on the wine glass holder theme. This one has an unfilled carving, but my sister is working on painting them, so we'll see how the painted ones come out.

--Andy

001.JPG
013.JPG
012.JPG

What are the measurements on those holders? I am making some up but I think I have them too skinny. Thanks for your help.

Antennas

Post by **llwood** » Mon Mar 30, 2015 12:47 am

antennasDIY wrote:What are the measurements on those holders? I am making some up but I think I have them too skinny. Thanks for your help.

Antennas

Antennas, sorry I didn't get back to you sooner. I didn't notice this until now.

I'll be happy to share the measurements with you, but I think it might be easier just to post the VCP file, so I'll do that now. Let me know if you have any questions that this doesn't answer.

Cheers,
--Andy

Post by **llwood** » Mon Mar 30, 2015 12:52 am

llwood wrote:This one has an unfilled carving, but my sister is working on painting them, so we'll see how the painted ones come out.

I just got the painted wine glass holders! This project brought in the whole family: Design by Andy, cutting and finishing by father Marty, and painting by sister Erica.

Post by **llwood** » Mon Mar 30, 2015 12:54 am

: Four of them

: Closeup of just one

: Closeup of the painting

Whoops, forgot to attach the pictures!

Vectric Customer

Wine Glass Holders

Re: Wine Glass Holders

Re: Wine Glass Holders

Re: Wine Glass Holders

Re: Wine Glass Holders

Re: Wine Glass Holders

Re: Wine Glass Holders

Re: Wine Glass Holders

Re: Wine Glass Holders

Re: Wine Glass Holders

Re: Wine Glass Holders

Re: Wine Glass Holders

Re: Wine Glass Holders

Re: Wine Glass Holders

Re: Wine Glass Holders

Re: Wine Glass Holders