Dresser Box

An area to upload images of pieces cut using VCarve Pro

Re: Dresser Box

Postby glenninvb » Thu Mar 06, 2014 9:01 pm

Andy,

Thanks,

VCP, my first attempt at any 3d, using the free Vector Art 3d machinist.
Just set the model height I wanted and created a profile around the part to fit pocket in top
glenninvb
Vectric Wizard
 
Posts: 1129
Joined: Thu Jul 18, 2013 4:58 pm
Model of CNC Machine: homebuild / VCP 8.0

Re: Dresser Box

Postby glenninvb » Fri Mar 07, 2014 2:24 am

Andy,

Just realized I didn't say, its a Vector Art 3d model (the deer and trees) a panel scene.
Vector Art like Vectric, do the hard part....
glenninvb
Vectric Wizard
 
Posts: 1129
Joined: Thu Jul 18, 2013 4:58 pm
Model of CNC Machine: homebuild / VCP 8.0

Re: Dresser Box

Postby skiptagg » Sun Mar 09, 2014 6:23 pm

That's a great box. I download the hinge and plan to use it on some of the boxes I'm making. Love the design of the box and was wondering if you had the plans for the box (not the engraving but the box only). could use it.

Thanks Much Skip.
skiptagg
 
Posts: 2
Joined: Mon Jul 02, 2012 7:05 pm
Model of CNC Machine: Shark Next Wave Automation

Re: Dresser Box

Postby glenninvb » Sun Mar 09, 2014 7:30 pm

Skip,

These 2 vectors are all I used, but I epoxy laminated the maple and walnut to a thickness of 2.250
Used a 3/4 x 2 straight bit to pocket and a 1/2 x 2 1/2 for the profile
Used 1/2" thick material for top

Depending on your machine you may have to adjust
Attachments
New.crv Dresser box (SPalm).crv
(15.5 KiB) Downloaded 473 times
glenninvb
Vectric Wizard
 
Posts: 1129
Joined: Thu Jul 18, 2013 4:58 pm
Model of CNC Machine: homebuild / VCP 8.0

Re: Dresser Box

Postby skiptagg » Sun Mar 09, 2014 8:39 pm

Thanks. I'll let you know how I do.

Skip
skiptagg
 
Posts: 2
Joined: Mon Jul 02, 2012 7:05 pm
Model of CNC Machine: Shark Next Wave Automation

Re: Dresser Box

Postby scottp55 » Thu Mar 12, 2015 2:27 pm

Thanks Glenn,
Missed this one somehow until Ilwood linked it :)
scott
scott
User avatar
scottp55
Vectric Wizard
 
Posts: 3055
Joined: Thu May 09, 2013 11:30 am
Location: Kennebunkport, Maine, US
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10

Re: Dresser Box

Postby CarveOne » Mon Mar 16, 2015 11:25 am

I was playing with your file yesterday and scaled it up to 12" width, then rounded the border and added a wicker weave to the lid. I'll probably add a centerpiece with a name once I figure out who it will be made for.

The box shape sort of resembles a straw fly fishing tackle box that I have seen in the distant past, so I added the wicker. Thanks for the vectors. Though this is an Aspire modification for the top panel, you can do a lot with it using wildlife or other line drawing vector art designs and Vcarve toolpaths.

CarveOne
Attachments
Top Panel - Wicker Weave 3D.jpg
CarveOne
http://www.carveonecncwoodcraft.com
CarveOne
Vectric Wizard
 
Posts: 1350
Joined: Sun Nov 28, 2010 5:10 pm
Location: Eastern NC, USA
Model of CNC Machine: Home built designs - 3'x4' and 5'x12'

Re: Dresser Box

Postby mountaincraft » Wed Mar 18, 2015 3:16 am

Wow! really Nice!

Love the hinge!
mountaincraft
Vectric Craftsman
 
Posts: 228
Joined: Sat Apr 30, 2011 2:30 pm
Location: Shingletown, Ca. 96088
Model of CNC Machine: DIY 4' x 8' CNC Router/Plasma

Re: Dresser Box

Postby llwood » Mon Mar 30, 2015 12:35 am

VCP Projects 024.JPG
VCP Projects 023.JPG


Glenn, We love the Dresser Box design. We first did one with the same deer drawing that you used, but then got feedback from those of the feminine persuasion that they would like something a little less "masculine", so we did some with this rose pattern, also from the Vector Art 3D website. I understand there are some new features in VCP 8 to make this easier, but we haven't had time to learn about them yet. Hopefully soon....

Great design, and, once again, great hinge!

Thanks,
Andy and Marty
User avatar
llwood
Vectric Wizard
 
Posts: 385
Joined: Sun Nov 18, 2012 5:07 pm
Location: Dillsburg, PA
Model of CNC Machine: Legacy Maverick

Re: Dresser Box

Postby glenninvb » Mon Mar 30, 2015 1:09 am

Andy and Marty,
They look great. The profile of the box was actually from Spalm, I made one of the jewelry boxes he designed and liked the shape.
glenninvb
Vectric Wizard
 
Posts: 1129
Joined: Thu Jul 18, 2013 4:58 pm
Model of CNC Machine: homebuild / VCP 8.0

Re: Dresser Box

Postby llwood » Mon Mar 30, 2015 1:10 am

Thanks for letting us know. We want to give credit where credit is due, so thanks to Steve Palm as well!

--Andy
User avatar
llwood
Vectric Wizard
 
Posts: 385
Joined: Sun Nov 18, 2012 5:07 pm
Location: Dillsburg, PA
Model of CNC Machine: Legacy Maverick

Re: Dresser Box

Postby llwood » Wed Aug 01, 2018 5:21 pm

More variations on the dresser box design, these for horse lovers.
Attachments
DSCF0302.jpeg
DSCF0305.jpeg
User avatar
llwood
Vectric Wizard
 
Posts: 385
Joined: Sun Nov 18, 2012 5:07 pm
Location: Dillsburg, PA
Model of CNC Machine: Legacy Maverick

Re: Dresser Box

Postby Royrufus » Fri Nov 30, 2018 9:58 pm

Great looking box. Like others who posted I'm intrigued with your hinge.
Thanks for posting it
Royrufus
 
Posts: 9
Joined: Thu Nov 29, 2018 3:46 am
Model of CNC Machine: Carve King

Previous

Return to VCarve - Gallery

Who is online

Users browsing this forum: harlindg and 15 guests