Large, Small and In Between

An area to upload images of pieces cut using VCarve Pro
Post Reply
CLyon
Vectric Apprentice
Posts: 85
Joined: Tue Nov 29, 2005 3:08 pm
Location: Narberth, PA

Large, Small and In Between

Post by CLyon »

Here are a few varied pieces - varied in size and materials.
Attachments
IMG_3389.jpg
Art Deco storks on pine, carved with HerSaf 120 V bit. Size about 12x17 inches
(1.31 MiB) Downloaded 333 times
IMG_3387.jpg
Aluminum approx. 2x2.5 inches. Draft of nametag for cello case
(1.27 MiB) Downloaded 302 times
IMG_3390.jpg
Rotate head 90 degrees to the left. Apporx 3ft high on ply, done with 90 degree HerSaf V bit
(1.02 MiB) Downloaded 352 times

Post Reply