Tambour Box
-
- Vectric Craftsman
- Posts: 193
- Joined: Sun Nov 04, 2012 4:27 pm
- Model of CNC Machine: PRS Buddy48alpha ,4x6' 130w laser, Wazer
Re: Tambour Box
In the spirit of the season, if anyone else would like to take a journey down the tambour box path, I'll help them along by donating some CRV files and observations.
I would love the files please. geneuselman [at] gmail [dot] com
I would love the files please. geneuselman [at] gmail [dot] com
-
- Vectric Wizard
- Posts: 520
- Joined: Sun May 03, 2015 12:25 pm
- Model of CNC Machine: Axiom AR8
- Location: Savannah, GA
Re: Tambour Box
Gene: They are posted on page 1. Good luck.
- martin54
- Vectric Archimage
- Posts: 7353
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Tambour Box
As savannahdan says they are on the first page, they are actually on the same post as the quoted text you have used, look at the bottom of that postGeneMpls wrote:In the spirit of the season, if anyone else would like to take a journey down the tambour box path, I'll help them along by donating some CRV files and observations.
I would love the files please. geneuselman [at] gmail [dot] com
-
- Vectric Craftsman
- Posts: 193
- Joined: Sun Nov 04, 2012 4:27 pm
- Model of CNC Machine: PRS Buddy48alpha ,4x6' 130w laser, Wazer
Re: Tambour Box
Thank you all, it is not pretty gettin' old. Gene
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Tambour Box
You're forgetting the Upside Gene
Dad's on 24 hour home hospice care...EVERY day is a GOOD Day he says!
Dad's on 24 hour home hospice care...EVERY day is a GOOD Day he says!
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Posts: 29
- Joined: Thu Oct 19, 2017 4:50 pm
- Model of CNC Machine: Shopbot Desktop max
- Location: HOuston, TX
Re: Tambour Box
Hello,
I am attempting my tambour box. I have a dumb question however. How do you determine how wide the tambour lid should be? Is there a formula for the gap needed from side to side?
thanks for your guidance.
I am attempting my tambour box. I have a dumb question however. How do you determine how wide the tambour lid should be? Is there a formula for the gap needed from side to side?
thanks for your guidance.
Re: Tambour Box
connalj wrote:Hello,
I am attempting my tambour box. I have a dumb question however. How do you determine how wide the tambour lid should be? Is there a formula for the gap needed from side to side?
thanks for your guidance.
Really neat project! Glad you dug this up. And I also agree about the tambour lid part. There is nothing in the .crv files about that. As far as the width... I would assume it is the same width as the rear of the drawer, which is 10.25", is that correct? And I also assume he is using a very thin wood since the pocket in the sides for it are .3222. He did say that he made that track wider since it snagged. I do wonder how deep he made each of the grooves for the tambour. If the wood is 1/4", it would have to be around .125" I assume?
Again, thanks for finding this and thanks to the OP for sharing.
- adze_cnc
- Vectric Wizard
- Posts: 4379
- Joined: Sat Jul 27, 2013 10:08 pm
- Model of CNC Machine: AXYZ 4008
- Location: Vancouver, BC, Canada
Re: Tambour Box
I'd check out the original article: http://www.woodworkersjournal.com/wp-co ... ed-Box.pdfconnalj wrote:How do you determine how wide the tambour lid should be?
Re: Tambour Box
adze_cnc wrote:I'd check out the original article: http://www.woodworkersjournal.com/wp-co ... ed-Box.pdfconnalj wrote:How do you determine how wide the tambour lid should be?
Thanks for sharing that link... but I honestly don't like the way they made the Tambour in the pdf. A frame of 11 3/16" x 12" and he set 21 of the 1/2 by 3/16 slats in the box... then I got lost, but somehow he was gluing them. If you look at the OP's pictures, it appears he took some kind of thin board, the size of the Tambour and CNC'd the slats. I'd like to know his process. I think possibly taking a 11 3/16" x 12" plywood and cutting the slats so it bends would be much easier, imo.
- adze_cnc
- Vectric Wizard
- Posts: 4379
- Joined: Sat Jul 27, 2013 10:08 pm
- Model of CNC Machine: AXYZ 4008
- Location: Vancouver, BC, Canada
Re: Tambour Box
There is a link within the PDF to a video of Sandor N. gluing up the tambour assembly: https://www.woodworkersjournal.com/making-tambour/
-
- Vectric Apprentice
- Posts: 74
- Joined: Mon Sep 19, 2011 10:54 pm
- Model of CNC Machine: CNC Router Parts & Shopbot Buddy
- Location: Melbourne, Australia
Re: Tambour Box
Paul
The canvas method is not a neat solution however Amana and Rockler have routed solutions. Rockler is the cheapest and uses fishing line etc to hold the door together but it works quite well and is easy to understand. The Amana solution is really posh and really quite elegant. Both methods need a router table or CNC. Here is a link to the Amana method.
You can also use cheaper cutters from AliXpress utilizing the fishing line method. We also had some success using adhesive backed leatherete. Great in cold climates but fails around 40 degrees celsius.
The canvas method is not a neat solution however Amana and Rockler have routed solutions. Rockler is the cheapest and uses fishing line etc to hold the door together but it works quite well and is easy to understand. The Amana solution is really posh and really quite elegant. Both methods need a router table or CNC. Here is a link to the Amana method.
You can also use cheaper cutters from AliXpress utilizing the fishing line method. We also had some success using adhesive backed leatherete. Great in cold climates but fails around 40 degrees celsius.