Stained Glass project
Stained Glass project
Here is an image of a stained glass project with actual colored glass but with wood frame instead of lead caming. Piece has front and rear halves that are screwed together. Pockets routed on the mating surfaces hold the glass. Both front and back are 2-sided pieces. I included locating holes and dowel pins to align the front to back and while routing second side of each half. I downloaded the "Heart of God" image, determined the depths I needed, and let the router do it's job in two boards glued up from a 1x8 cherry. Front and back are obviously mirror images.
- ChrisInEstes
- Vectric Wizard
- Posts: 841
- Joined: Fri Jul 17, 2009 8:00 pm
- Model of CNC Machine: Vytek 4' X 8' - Perske Spindle - Mach3
- Location: Estes Park, Colorado, USA
Re: Stained Glass project
Nice idea, and nice work.
Chris
Chris
Aspire 9.5 - FlexiEXPERT 11 - Vytek Rebel 4' x 8' - 5HP Perske Spindle
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
- mezalick
- Vectric Wizard
- Posts: 2970
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Re: Stained Glass project
Nice work....
~M
~M
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
- llwood
- Vectric Wizard
- Posts: 392
- Joined: Sun Nov 18, 2012 5:07 pm
- Model of CNC Machine: Legacy Maverick
- Location: Dillsburg, PA
- Contact:
Re: Stained Glass project
What a great idea. Resulting in a stunning effect. Inspiring.
- mtylerfl
- Vectric Archimage
- Posts: 5865
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Stained Glass project
Very nice work!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Vectric Wizard
- Posts: 823
- Joined: Tue Jun 01, 2010 4:51 pm
- Model of CNC Machine: CAMaster MC4848
- Location: Prescott AZ
Re: Stained Glass project
Thank you for posting this. It is excellent work and the meaning is priceless.
Mark
Mark
-
- Vectric Staff
- Posts: 338
- Joined: Fri Jun 01, 2012 1:30 pm
- Model of CNC Machine: Various
- Location: Redditch, UK
- Contact:
Re: Stained Glass project
Oooh this is great! Thanks for sharing!
Beki
Senior Application Engineer - Vectric Ltd.
Senior Application Engineer - Vectric Ltd.