my turn of the old man

An area to upload images of pieces cut using VCarve Pro

my turn of the old man

Postby frank taylor » Thu Apr 20, 2017 9:00 am

finished size 310mmx290x35mm machined in pine finished with bronze b metal coating then tiffany green patina
SDC10965 bronze old man.jpg
old man in prison
frank taylor
 
Posts: 28
Joined: Mon Sep 19, 2016 8:45 am
Model of CNC Machine: bravoprodigy be3030

Re: my turn of the old man

Postby MTSO » Thu Apr 20, 2017 8:57 pm

Hi Frank
The finish on that looks way cool is it spray painted or done by hand?. how long did it take to machine?.

regards

Brian
MTSO
Vectric Craftsman
 
Posts: 214
Joined: Tue Mar 11, 2014 6:12 pm
Location: Auckland New Zealand
Model of CNC Machine: salecnc XJ1224

Re: my turn of the old man

Postby frank taylor » Fri Apr 21, 2017 2:09 am

HI MTSO
THIS WAS HAND PAINTED TWO COATS WITH A BRUSH STIPPLE EACH COAT BUY DABBING THE BRUSH ALL OVER TO GET RID OF THE BRUSH MARKS APPLY THE PATINA TO THE SECOND COAT WHEN IT IS TOUCH DRY WHEN YOU ARE HAPPY WITH THE AMOUNT OF GREEN AGING SEAL IT BY SPRAYING POLLY THIS STOPS THE PATINA REACTING THIS HAD TWO COATS OF POLLY WHEN DRY BRUSHED ON BLACK BOOT POLISH AND RUBBED OFF WITH A CLOTH
AS FOR TIME TO MACHINE 5HRS TO ROUGH 1/4" END MILL FINISH 1/8" BALL NOSE 6HRS THE STONE WALL 4HRS 1/8" BALL NOSE
frank taylor
 
Posts: 28
Joined: Mon Sep 19, 2016 8:45 am
Model of CNC Machine: bravoprodigy be3030


Return to VCarve - Gallery

Who is online

Users browsing this forum: No registered users and 10 guests