Gadget Bootcamp

This section is for general discussion about Gadgets

Re: Gadget Bootcamp

Postby jimandi5000 » Sat Dec 21, 2019 10:37 pm

Boot Camp gadget video number 2

Hello all,

Have a look at video number two. I have acquired a new text to speech solution.

http://www.jimandi.com/VCarve-Tools/Videos/GadgetVideo.html


Your feedback is always welcome.
Attachments
BootCamp.jpg
Thanks,
Jim
User avatar
jimandi5000
Vectric Craftsman
 
Posts: 271
Joined: Wed Mar 11, 2015 6:50 pm
Location: North Houston Tx.
Model of CNC Machine: Home Made 60 x 120

Re: Gadget Bootcamp

Postby jimandi5000 » Sun Dec 22, 2019 12:27 am

Here is a copy of the code if you want.
Attachments
Lua_Video_02.zip
(3.07 KiB) Downloaded 10 times
Thanks,
Jim
User avatar
jimandi5000
Vectric Craftsman
 
Posts: 271
Joined: Wed Mar 11, 2015 6:50 pm
Location: North Houston Tx.
Model of CNC Machine: Home Made 60 x 120

Re: Gadget Bootcamp

Postby ElevationCreations » Sun Dec 22, 2019 8:29 pm

Jim,
Thanks for taking the time and putting these videos together. This is one of those things on my bucket list to get to so I could understand how to do it.

The only comment that I have is if you could show an overview and purpose of the gadget during the video introduction prior to getting into to the code editing it would help (in my case) with understanding what each line edit is accomplishing.

Thanks
Craig
ElevationCreations
Vectric Craftsman
 
Posts: 119
Joined: Thu May 14, 2015 12:29 am
Location: Colorado
Model of CNC Machine: Shapeoko SO3 XXL & SO3

Re: Gadget Bootcamp

Postby jimandi5000 » Sun Dec 22, 2019 8:54 pm

Hi Craig,
Okay,

Thanks for the feedback. I will see if I can integrate some code editing in the next video (4).

Are you using Zero Brains studio is your editor?
Thanks,
Jim
User avatar
jimandi5000
Vectric Craftsman
 
Posts: 271
Joined: Wed Mar 11, 2015 6:50 pm
Location: North Houston Tx.
Model of CNC Machine: Home Made 60 x 120

Re: Gadget Bootcamp

Postby jimandi5000 » Sun Dec 22, 2019 9:06 pm

Boot Camp gadget video number 3

Hello all,

Have a look at video number three.



Your feedback is always welcome.
Attachments
Lua_Video_03.zip
(5.28 KiB) Downloaded 7 times
3.jpg
Thanks,
Jim
User avatar
jimandi5000
Vectric Craftsman
 
Posts: 271
Joined: Wed Mar 11, 2015 6:50 pm
Location: North Houston Tx.
Model of CNC Machine: Home Made 60 x 120

Re: Gadget Bootcamp

Postby jimandi5000 » Mon Dec 23, 2019 1:37 am

Hi All,

This is what I have in the works for the next videos:
Video 4
Tread and Riser Thickness

Video 5
Adding a Stair stringer

Video 6
Storing and retrieving user variables to the register​

Video 7
Building a HTML Graphical user interface​
Connecting a HTML Graphical user interface


Video 8
Writing a bill of materials to a file

Video 9
Tool database and Toolpaths

Video 10
Zero Brains Studio​
Debugging your code​
Making Zero Brains Studio smart


Do you seen anything missing or something you would like to see?
Thanks,
Jim
User avatar
jimandi5000
Vectric Craftsman
 
Posts: 271
Joined: Wed Mar 11, 2015 6:50 pm
Location: North Houston Tx.
Model of CNC Machine: Home Made 60 x 120

Re: Gadget Bootcamp

Postby jimandi5000 » Mon Dec 23, 2019 3:51 am

Boot Camp gadget video number 4

Hello all,

Have a look at video number four.


http://www.jimandi.com/VCarve-Tools/Videos/GadgetVideo.html
Your feedback is always welcome.
Attachments
4.jpg
Thanks,
Jim
User avatar
jimandi5000
Vectric Craftsman
 
Posts: 271
Joined: Wed Mar 11, 2015 6:50 pm
Location: North Houston Tx.
Model of CNC Machine: Home Made 60 x 120

Re: Gadget Bootcamp

Postby jimandi5000 » Fri Dec 27, 2019 3:55 am

Hello all,

I have moved my Gadget Boot Camp Video's to new YouTube channel. This move will add a lot of functionality I currently don't have my own website. Items such as, look and feel, search-ability, feedback, close caption, and multiple language support just to name a few. I have recompiled all of the videos (4) utilizing the new text to voice software and also have standardized on fonts and entry screens.

Please have a look and as always your feedback is always welcome.

So now I am back to work on building video five, adding the stringer. ;)
Attachments
Vcarve.jpg
Thanks,
Jim
User avatar
jimandi5000
Vectric Craftsman
 
Posts: 271
Joined: Wed Mar 11, 2015 6:50 pm
Location: North Houston Tx.
Model of CNC Machine: Home Made 60 x 120

Re: Gadget Bootcamp

Postby jimandi5000 » Fri Dec 27, 2019 5:07 pm

Thanks,
Jim
User avatar
jimandi5000
Vectric Craftsman
 
Posts: 271
Joined: Wed Mar 11, 2015 6:50 pm
Location: North Houston Tx.
Model of CNC Machine: Home Made 60 x 120

Re: Gadget Bootcamp

Postby jimandi5000 » Thu Jan 02, 2020 5:09 am

Hello boys and girls,

I hope each of you had a wonderful Christmas and New Year's.

To kick off 2020, I have just completed the video five of the Boot Camp series.

Developing a gadget to the next step, drawing the stringer and doing a code review.

Here is the link to the channel: https://www.youtube.com/channel/UCSM4fWwTIvVI91nTzIe554Q

Here's a link to video five: https://youtu.be/JDDqMp0UgYI
Attachments
5.jpg
Thanks,
Jim
User avatar
jimandi5000
Vectric Craftsman
 
Posts: 271
Joined: Wed Mar 11, 2015 6:50 pm
Location: North Houston Tx.
Model of CNC Machine: Home Made 60 x 120

Re: Gadget Bootcamp

Postby jimandi5000 » Fri Jan 03, 2020 3:58 am

Hello All,

Video 6 has been posted.

Video 6: Storing and retrieving user variables to the register​

Here is the link to the files: http://www.jimandi.com/VCarve-Tools/Videos/Lua_Video_06.zip

Here is the link to the channel: https://www.youtube.com/channel/UCSM4fWwTIvVI91nTzIe554Q

Here is the link to the video: https://youtu.be/p22QIBBlOug
Attachments
6.jpg
Thanks,
Jim
User avatar
jimandi5000
Vectric Craftsman
 
Posts: 271
Joined: Wed Mar 11, 2015 6:50 pm
Location: North Houston Tx.
Model of CNC Machine: Home Made 60 x 120

Re: Gadget Bootcamp

Postby jimandi5000 » Fri Jan 03, 2020 4:51 am

Here is the correct link to Video 6: https://youtu.be/I0ysOuKO8dc
Thanks,
Jim
User avatar
jimandi5000
Vectric Craftsman
 
Posts: 271
Joined: Wed Mar 11, 2015 6:50 pm
Location: North Houston Tx.
Model of CNC Machine: Home Made 60 x 120

Re: Gadget Bootcamp

Postby jimandi5000 » Sat Jan 04, 2020 2:30 am

Hi there,

A new Boot Camp video has been uploaded.

Video 7
Building a HTML Graphical user interface​
Connecting a HTML Graphical user interface


Here is the link to all of the files: http://www.jimandi.com/VCarve-Tools/Videos/Lua_Video_07.zip

Youtube Channel: https://www.youtube.com/channel/UCSM4fWwTIvVI91nTzIe554Q

Video 07 is here: https://youtu.be/QJbEDdyq0TE
Attachments
Video07.jpg
7.jpg
Thanks,
Jim
User avatar
jimandi5000
Vectric Craftsman
 
Posts: 271
Joined: Wed Mar 11, 2015 6:50 pm
Location: North Houston Tx.
Model of CNC Machine: Home Made 60 x 120

Re: Gadget Bootcamp

Postby jimandi5000 » Mon Jan 06, 2020 3:34 am

Hello All,

I have posted Video 8 to YouTube channel.

Video 8
Adding a bill of materials function and writing to a DAT and TXT file.

Link to the files: http://www.jimandi.com/VCarve-Tools/Videos/Lua_Video_08.zip

Here is the link to the channel: https://www.youtube.com/channel/UCSM4fWwTIvVI91nTzIe554Q

Here is the link to the video: https://youtu.be/_0onaKIpORg
Attachments
Video08.jpg
8.jpg
Lua_Video_08.zip
(134.43 KiB) Downloaded 4 times
DatFile.jpg
Thanks,
Jim
User avatar
jimandi5000
Vectric Craftsman
 
Posts: 271
Joined: Wed Mar 11, 2015 6:50 pm
Location: North Houston Tx.
Model of CNC Machine: Home Made 60 x 120

Re: Gadget Bootcamp

Postby jimandi5000 » Wed Jan 08, 2020 4:37 am

Hi there,

I have banged out number 9 for your viewing pleasure.

I am now working on Video 10 the ZeroBrane Studio​ a how to on Debugging your code​ and making Making ZeroBrane Studio smarter and offer tool tips on Vectric coding functions.

---------

Video 9
Tool database and Toolpaths

Here is the link to the files: http://www.jimandi.com/VCarve-Tools/Videos/Lua_Video_09.zip

Here is the link to the channel: https://www.youtube.com/channel/UCSM4fWwTIvVI91nTzIe554Q

Here is the link to the video: https://youtu.be/SuhlfNyvqU8
Attachments
9.jpg
Lua_Video_09.zip
(153.7 KiB) Downloaded 4 times
Thanks,
Jim
User avatar
jimandi5000
Vectric Craftsman
 
Posts: 271
Joined: Wed Mar 11, 2015 6:50 pm
Location: North Houston Tx.
Model of CNC Machine: Home Made 60 x 120

PreviousNext

Return to Gadgets - General

Who is online

Users browsing this forum: No registered users and 9 guests