Vectric Newsletter - Issue 34 - September 2012

[StuartH]

This month’s newsletter is now available – please follow the links below to read more about each item.

You can subscribe to the Vectric Newsletter by clicking here: http://www.vectric.com/WebSite/Vectric/ ... cribe.html

Newsletter Issue 34 - http://www.vectric.com/WebSite/Vectric/ ... 4-sep.html

• Free Aspire Project - Trout Bookends - http://www.vectric.com/WebSite/Vectric/ ... kends.html
• Custom Inlays - Customer Case Study - http://www.vectric.com/WebSite/Vectric/ ... nlays.html
• User Group - Fully Booked
• User Showcase:
  • Modern Bird Feeder - http://www.vectric.com/forum/viewtopic.php?f=5&t=15369
  • Steering Wheel - http://www.vectric.com/forum/viewtopic.php?f=5&t=15310
  • Wall of Clocks - http://www.vectric.com/forum/viewtopic.php?f=29&t=15334
  • Educational Display - http://www.vectric.com/forum/viewtopic.php?f=29&t=15372

The Vectric Team

[grjensen]

Is it possible to make the files for the trout bookends to work on Cut3d

Thank you

Gerald Jensen

[tmerrill]

Hi Gerald,

It is not possible with these files, they are intended for Aspire V3.5 only.

However, there are similar fish models available on the VectorArt3D website that you could purchase, machine with Cut3D and then manually saw in half to create a similar design.

Just be sure you pick out a model that is symmetrical in design, that is you can either set it up for two sided machining or machine mirrored right and left halves and then glue together.

Tim