Project of the Month - Steampunk Sleigh
-
- Vectric Staff
- Posts: 555
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Project of the Month - Steampunk Sleigh
Check out our first FREE Christmas Project of 2019 courtesy of Michael Tyler
The Steampunk Santa Sleigh features a unique pseudo-futuristic Victorian-era style and is a very special Christmas decoration for display as a holiday table centrepiece or anywhere else in your home!
The sleigh has three rockets (powered by magic elf dust) so Santa can make his deliveries with or without, his flying reindeer. You know, just in case the reindeer get sick or otherwise incapacitated!
Get into the Christmas spirit early and download this cool project now from your V&CO account!
https://www.vectric.com/vectric-communi ... BPS91LkHXo
The Steampunk Santa Sleigh features a unique pseudo-futuristic Victorian-era style and is a very special Christmas decoration for display as a holiday table centrepiece or anywhere else in your home!
The sleigh has three rockets (powered by magic elf dust) so Santa can make his deliveries with or without, his flying reindeer. You know, just in case the reindeer get sick or otherwise incapacitated!
Get into the Christmas spirit early and download this cool project now from your V&CO account!
https://www.vectric.com/vectric-communi ... BPS91LkHXo
- rtibbs
- Vectric Wizard
- Posts: 411
- Joined: Mon Nov 12, 2018 11:15 pm
- Model of CNC Machine: Shopbot desktop
- Location: Central Florida
Re: Project of the Month - Steampunk Sleigh
Way to go Michael. Your timing is perfect as I just completed my Steampunk Desk Lamp.
My next project
My next project
- gkas
- Vectric Wizard
- Posts: 1450
- Joined: Sun Jan 01, 2017 3:39 am
- Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
- Location: Southern California
Re: Project of the Month - Steampunk Sleigh
This is early on my list.... Great
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Project of the Month - Steampunk Sleigh
Great job Michael. Can't wait to make one up or two or three
John
Maker of Chips
Maker of Chips
- scottp55
- Vectric Wizard
- Posts: 4713
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Project of the Month - Steampunk Sleigh
One of your better ones Michael!!
Congrats!!!
sigh......ONE of these days...Aspire!!
scott
Congrats!!!
sigh......ONE of these days...Aspire!!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Vectric Wizard
- Posts: 409
- Joined: Thu Apr 06, 2017 3:07 am
- Model of CNC Machine: Camaster Stinger SR24
- Location: Addison, PA
Re: Project of the Month - Steampunk Sleigh
A most excellent design, Michael. Thank you!!!
And to think....Im just getting around to cutting your original Christmas Sled.
I think my Vectric "to do list" is now officially longer than my "honey do" list.
And to think....Im just getting around to cutting your original Christmas Sled.
I think my Vectric "to do list" is now officially longer than my "honey do" list.
Joe
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
- mtylerfl
- Vectric Archimage
- Posts: 5865
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Project of the Month - Steampunk Sleigh
Thank you all! I’m eager to see pics when/if you have a chance to post!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- rtibbs
- Vectric Wizard
- Posts: 411
- Joined: Mon Nov 12, 2018 11:15 pm
- Model of CNC Machine: Shopbot desktop
- Location: Central Florida
Re: Project of the Month - Steampunk Sleigh
You’ve outdone yourself with this one Michael. What kid of 77 years doesn’t like gear trains, rack and pinions, jet engine pods etc, etc. I can hardly wait to start cutting this one
-
- Vectric Wizard
- Posts: 823
- Joined: Tue Jun 01, 2010 4:51 pm
- Model of CNC Machine: CAMaster MC4848
- Location: Prescott AZ
Re: Project of the Month - Steampunk Sleigh
I couldn't agree more about out doing yourself Michael.
The design alone must have taken you a lot of time. The detail programming and cutting is incredible to say nothing about the painting. Wow!!
I want to make it and send it to you to paint...
It just gets better and better.
I always look forward to your projects even if I don't make them.
Mark
The design alone must have taken you a lot of time. The detail programming and cutting is incredible to say nothing about the painting. Wow!!
I want to make it and send it to you to paint...
It just gets better and better.
I always look forward to your projects even if I don't make them.
Mark
- mtylerfl
- Vectric Archimage
- Posts: 5865
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Project of the Month - Steampunk Sleigh
Thank you guys!!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- rtibbs
- Vectric Wizard
- Posts: 411
- Joined: Mon Nov 12, 2018 11:15 pm
- Model of CNC Machine: Shopbot desktop
- Location: Central Florida
Re: Project of the Month - Steampunk Sleigh
Finished cutting all the parts today and now I’m ready, as Mark said, to send them to you for painting
Now if we just had your address......
I’ll post pictures when I get it finished. (Hopefully before Christmas but no guarantee)
Ron
Now if we just had your address......
I’ll post pictures when I get it finished. (Hopefully before Christmas but no guarantee)
Ron
- mtylerfl
- Vectric Archimage
- Posts: 5865
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Project of the Month - Steampunk Sleigh
Uh oh! I might need to buy some more Paint Pens!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Vectric Apprentice
- Posts: 73
- Joined: Sat Jun 18, 2011 2:44 am
- Model of CNC Machine: Shark Pro Plus
Re: Project of the Month - Steampunk Sleigh
Thank you Michael for the Santa Sleigh model. Great design. Here is my version of it.
- mtylerfl
- Vectric Archimage
- Posts: 5865
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Project of the Month - Steampunk Sleigh
Thank you for posting, Ralph! Your sled looks fantastic and the “Christmas 2019” carve in the bottom is a GREAT addition! Wish I had thought of that!!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Posts: 1
- Joined: Thu Jun 20, 2013 7:37 pm
- Model of CNC Machine: Camaster Stinger SR23
- Location: Albuquerque, NM
Re: Project of the Month - Steampunk Sleigh
First time poster, long time reader, lousy photographer.
Here’s my Steampunk Santa Sleigh entry, finished just in time for Christmas. It was a fun project but I struggled a bit with the detail painting as you can see.
Thanks Michael, and thanks RalphPitz – (I stole your dating idea).
Here’s my Steampunk Santa Sleigh entry, finished just in time for Christmas. It was a fun project but I struggled a bit with the detail painting as you can see.
Thanks Michael, and thanks RalphPitz – (I stole your dating idea).