Aaron Leedham Phone Amplifer Drawing issue
- mrmfwilson
- Vectric Craftsman
- Posts: 239
- Joined: Thu May 31, 2012 6:49 pm
- Model of CNC Machine: Legacy Arty 36
- Location: Georgetown, TX
Aaron Leedham Phone Amplifer Drawing issue
Not sure where I should post this but there is a problem with the .crv file. The holes in the top inside pieces are not the same dimension as the corresponding holes in the sides. I moved the side holes to line up with the inside pieces. I have attached the files.
- Attachments
-
- phone amplifier fixed.crv
- (2.74 MiB) Downloaded 220 times
Mr. Wilson
CenterLine Designs
Facebook - Centerline Designs
CenterLine Designs
Facebook - Centerline Designs
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Aaron Leedham Phone Amplifer Drawing issue
Thank you for sharing your updated filemrmfwilson wrote:Not sure where I should post this but there is a problem with the .crv file. The holes in the top inside pieces are not the same dimension as the corresponding holes in the sides. I moved the side holes to line up with the inside pieces. I have attached the files.