Here is a handy set of three heat-resistant table or countertop trivets representing three of the carnivorous food groups - Beef, Fish and Poultry!
The samples were finished with heatresistant paints in contrasting colors (silver and black) but you could opt to forego the two-tone and just use one color paint instead. The project files are intentionally kept separate, but you can create your own multiple layout for creating as many trivets per board, as you wish.
The dimensions of each trivet are about - 9.5 " diameter x 1.25" tall.
This free Vectric project requires Aspire 8.0/ VCarve 8.0 or higher.
Click the link to download the project files - http://www.vectric.com/cool-stuff/proje ... ivets.html
Free Project - Beef, Fish & Poultry Trivet
-
- Vectric Apprentice
- Posts: 71
- Joined: Tue Jun 10, 2014 10:42 am
- Model of CNC Machine: ShopBot
Free Project - Beef, Fish & Poultry Trivet
Graphic & Web Designer
www.vectric.com
www.vectric.com
-
- Posts: 17
- Joined: Mon Jul 20, 2015 1:51 am
- Model of CNC Machine: Home Built: 3 Axis. PMDX-422, Mach4
- Location: Kiama, Australia
Re: Free Project - Beef, Fish & Poultry Trivet
.
Last edited by NeilD321 on Fri Apr 29, 2016 7:11 am, edited 1 time in total.
-
- Posts: 17
- Joined: Mon Jul 20, 2015 1:51 am
- Model of CNC Machine: Home Built: 3 Axis. PMDX-422, Mach4
- Location: Kiama, Australia
Re: Free Project - Beef, Fish & Poultry Trivet
Nice work AmritpalP.
Could you tell me how you painted these please?
I'm sure there's a cheat to get the vcarve one colour and the top another, but I'm not sure what it is.
Could you tell me how you painted these please?
I'm sure there's a cheat to get the vcarve one colour and the top another, but I'm not sure what it is.
- Adrian
- Vectric Archimage
- Posts: 14680
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Free Project - Beef, Fish & Poultry Trivet
Click on the link and open the instruction PDF. How they are painted is described there.
-
- Posts: 17
- Joined: Mon Jul 20, 2015 1:51 am
- Model of CNC Machine: Home Built: 3 Axis. PMDX-422, Mach4
- Location: Kiama, Australia
Re: Free Project - Beef, Fish & Poultry Trivet
Thanks for getting back to me Adrian and thanks for putting the pdf instructions together.
Again, nice work.
Will post my attempts...
Again, nice work.
Will post my attempts...