Free Project - "Wooden Hinged Photo Frames"

[StuartH]

We're happy to announce this month's FREE project created by Michael Tyler for Vectric, which demonstrates
how to create slotted photo frames with integrated wooden hinges.

http://www.vectric.com/WebSite/Vectric/ ... -frame.htm

Each frame will hold a 3½ x 5 photo with a clear plastic protective sheet and cardboard backing. This project is
compatible with both VCarve Pro 6 and Aspire 3 (or greater).

The design is laid out as a tri-panel set, but can easily be modified to a bi-panel (by deleting the middle panel) or
to an unlimited number of interlocking panels (by duplicating the middle panel as many times as you wish).

The Vectric Team



To view all of the previous free Vectric projects, please visit http://www.vectric.com/forum/viewforum.php?f=41

[Tde1806]

We're happy to announce this month's FREE project created by Michael Tyler for Vectric, which demonstrates
how to create slotted photo frames with integrated wooden hinges.

http://www.vectric.com/WebSite/Vectric/ ... -frame.htm

Each frame will hold a 3½ x 5 photo with a clear plastic protective sheet and cardboard backing. This project is
compatible with both VCarve Pro 6 and Aspire 3 (or greater).

The design is laid out as a tri-panel set, but can easily be modified to a bi-panel (by deleting the middle panel) or
to an unlimited number of interlocking panels (by duplicating the middle panel as many times as you wish).

The Vectric Team



To view all of the previous free Vectric projects, please visit http://www.vectric.com/forum/viewforum.php?f=41

Is it not possible to make with Vcarve V5.5

[tparr]

The download is a Partworks file that doesn't seem to work with Aspire; I have Aspire 3.091 . Do I need to do something else?

[tmerrill]

It will open with Aspire.

Start Aspire and select Open an Existing File.

Find the file and select open.

Tim

[glenn]

Michael Tyler,
Thanks very much! Great looking project-I can't wait to cut it, but mainly I can't wait to fill it with pictures and give it to relatives as gifts!
Cute kid on the photos too.
Glenn

[mtylerfl]

Michael Tyler,
Thanks very much! Great looking project-I can't wait to cut it, but mainly I can't wait to fill it with pictures and give it to relatives as gifts!
Cute kid on the photos too.
Glenn

Thanks, Glenn. Hope you and your relatives will enjoy it!

The photos are of my eldest son...29 years old now!

[fretsman68]

Wow! Thank you so much for your time and generosity-

Dave

[Buc]

Thanks Michael T. and the Vectric team for the project of the month. I look forward to seeing them and making them.

I made this one out of a piece of old pine, because I wanted it to look old. That is me in the picture. That was about 55 years ago and I still wave the same way.

Buc

[mtylerfl]

Hi Buc - wow, you are fast! Thank you for sharing your photo!

[azzano]

Tried running the program as Gcode inch. Tap file in Mach 3 twice. Both times it went off course at different points in the program. Any suggerstions