Anyone else using v-carve with the Thermwood 9100 Supercontrol. Everything in the post works fine, I just have to edit the file each time before sending to the machine to account for my wasteboard thickness. Anyone have a better technique?
Thx
Fred
Thermwood 9100 supercontrol
Hi Fred,
If you send us details of what you have to change in the toolpath file
and the associated variables for the Thermwood controller. We might
be able to update the postp for you.
E-mail the info to - support@vectric.com
Tony
If you send us details of what you have to change in the toolpath file
and the associated variables for the Thermwood controller. We might
be able to update the postp for you.
E-mail the info to - support@vectric.com
Tony
-
- Posts: 2
- Joined: Wed Dec 20, 2006 11:02 pm
Just Sent mail
Tony,
Just forwarded on the file edits I do before going to the machine.
Thank you for your help.
Fred
Just forwarded on the file edits I do before going to the machine.
Thank you for your help.
Fred