need to edit my post help
need to edit my post help
My post works perfect except for one this. It lowers my Z first then it positions the X and Y.
-
metalworkz
- Vectric Wizard
- Posts: 2463
- Joined: Mon Mar 31, 2008 3:26 am
- Model of CNC Machine: SX3 CNC, DIY 24x20 & 48x60 routers
- Location: Modesto, California 95358 USA
Re: need to edit my post help
Hello,
It sounds like you may want to try to increase the rapid Z gaps above the material first without the need to modify the PP. You can change these settings on the 'Toolpaths' tab under the 'Setup Material' icon which opens the material setup window and allows you to set the Z gaps above the material for both clearance and plunge. I hope this helps in the meantime until you modify the PP.
It sounds like you may want to try to increase the rapid Z gaps above the material first without the need to modify the PP. You can change these settings on the 'Toolpaths' tab under the 'Setup Material' icon which opens the material setup window and allows you to set the Z gaps above the material for both clearance and plunge. I hope this helps in the meantime until you modify the PP.