I've found a new cnc controller software package that as far as I can tell has that magic price tag. It's free.
What I need though is a post processor. The software is posted on the www.******.com website as *****. I've tried all of the post processors for VCarve and they all end up being unusable. The controller is looking for a gcode file with a .mmg extension.
Dores anyone have any idea's?
EDIT - by Brian
Please note the software refered to in this post is NOT free. It was posted on a machine manufactureres web site for the convenience of their own customers
New Post Processor
- BrianM
- Vectric Staff
- Posts: 1964
- Joined: Mon May 16, 2005 10:15 am
- Model of CNC Machine: A few ...
- Location: Alcester U.K
- Contact:
Hi All,
The link Mark posted above (which I have removed, as well as editing the original post) is not a link to free software. I have dealt with the company in question before, and the software is posted on their web site as a convenience for their own customers using their brand of machine tool, it is not meant to be 'free' .
Regards
Brian
The link Mark posted above (which I have removed, as well as editing the original post) is not a link to free software. I have dealt with the company in question before, and the software is posted on their web site as a convenience for their own customers using their brand of machine tool, it is not meant to be 'free' .
Regards
Brian
-
- Vectric Craftsman
- Posts: 102
- Joined: Tue Sep 19, 2006 8:53 pm
- Model of CNC Machine: K2CNC- 25X25-50X50
- Location: Mackinaw City MI
- Contact:
affordable post proessors
i use mach2 and for $99 it is a great package !