Hi,
my computer died, and i lost everything.
does anyone has a working postprocessor for masterwood machines, i`ve tried several but they are not correct.
thank `s
Tiago
Help PP Masterwood
-
- Vectric Wizard
- Posts: 1592
- Joined: Sun Sep 16, 2007 2:59 pm
- Model of CNC Machine: Custom DIY
- Location: Lake St Clair, MI, USA
- Contact:
Re: Help PP Masterwood
What model machine do you have, or what control do you have?
There are lots of different Masterwood machines, many requiring different posts.
There are lots of different Masterwood machines, many requiring different posts.
Gerry - http://www.thecncwoodworker.com
-
- Vectric Wizard
- Posts: 1013
- Joined: Fri May 15, 2015 1:10 pm
- Model of CNC Machine: 3 axis small size machine
- Location: France
Re: Help PP Masterwood
Tiago,
I'm sincerely sorry, but if you don't have a backup strategy, be sure you'll encounter another computer crash sooner or later.
Did you try connecting the hard drive of the old computer to a new one to see if you can rescue data?
I'm sincerely sorry, but if you don't have a backup strategy, be sure you'll encounter another computer crash sooner or later.
Did you try connecting the hard drive of the old computer to a new one to see if you can rescue data?
Best regards
Didier
W7 - Aspire 8.517
Didier
W7 - Aspire 8.517
Re: Help PP Masterwood
Hi,
my machine is a 416k mw310 cn10 controller.
thank s all help is apreciated .
my machine is a 416k mw310 cn10 controller.
thank s all help is apreciated .
Re: Help PP Masterwood
Already tried everything, the computer is dead, luckly the company that sold the machine provided the masterwork software.
thank s
thank s