Rich Auto A11 MM to IN

This forum is for requests and queries about machine tool support for Vectric Products

Rich Auto A11 MM to IN

Postby cbr_speedster » Fri Apr 27, 2018 2:40 am

If anyone hears about an upgrade for the Rich Auto controller to read inch mode please let me know... I finally got it to read my inch programs but would like to see it on the control also.
Not sure how the controller can read an inch program but it shows it in metric... Strange.

Re: Rich Auto A11 MM to IN

Postby Adrian » Fri Apr 27, 2018 7:21 am

You can use whatever units you like within the Vectric software and even use both at the same time (I have metric tools with imperial feed rates for instance) and as long as the post processor you use matches what the machine/controller software is expecting everything will work fine. The job of the post processor is not just to create the correct code it also converts everything to one set of units.
User avatar
Vectric Archimage
Posts: 9819
Joined: Thu Nov 23, 2006 2:19 pm
Location: Surrey, UK
Model of CNC Machine: ShopBot PRS Alpha 96x48

Re: Rich Auto A11 MM to IN

Postby IslaWW » Sat Apr 28, 2018 2:14 am

The best bang for the buck is the Centroid Acorn. A number of Axiom users have upgraded to it
Gary Campbell
CNC Technology & Training
The Ultimate Woodworking Machine
GCnC411 (at)
User avatar
Vectric Wizard
Posts: 1274
Joined: Wed Nov 21, 2007 11:42 pm
Location: Marquette, MI, USA
Model of CNC Machine: The Ultimate Woodworking Machine

Return to Post Processors

Who is online

Users browsing this forum: No registered users and 2 guests