Hey, good to hear from you, Gary! Hope you're well.

This is code that was included on the 3.5" floppy

disk with the machine. Yes, apparently you can still buy a floppy drive on the internet. I have successfully run a "Demo" program, but it drilled quite a few more holes than the code would indicate. The instruction manual and controller interface are poorly translated from Italian so it's hard to know what is really going on. I miss WinCNC!

[777777

% 2

#1 DEMO----2

#3 X1200.00 Y400.00

#4 1

#5 0

G00 P00 X100.00 Y75.00 D5.00 P1

G00 P10 X100.00 Y75.00 D5.00 P1

G03 P100 X100.00 Y75.00 X100.00 D5.00 P1 S25.00

G04 P010 X75.00 Y75.00 Y75.00 D8.00 P1 S25.00

G00 P00 X75.00 Y150.00 D5.00 P1

G00 P10 X75.00 Y150.00 D5.00 P1

G00 P00 X1125.00 Y150.00 D5.00 P1

G03 P000 X75.00 Y150.00 X100.00 D5.00 P1 S25.00

G03 P100 X75.00 Y150.00 X75.00 D5.00 P1 S25.00

@

% 4

#1 NOTTE

#3 X1300.00 Y760.00

#4 1

#5 0

G00 P00 X54.00 Y54.00 D8.10 P1

G00 P00 X654.00 Y654.00 D8.20 P2

G00 P00 X1254.00 Y54.00 D8.30 P3

G00 P00 X1254.00 Y654.00 D8.40 P4

G00 P00 X654.00 Y54.00 D8.50 P1

G00 P00 X54.00 Y654.00 D8.10 P1

G02 L1 P00 X0.00 Y200.00 D8.00 P15.00 H2 V1.00

G00 P00 X560.00 Y200.00 D8.10 P1

G02 L0 P00 X1300.00 Y200.00 D8.00 P15.00 H2 V1.00

G00 P00 X740.00 Y200.00 D8.20 P1

G02 L1 P00 X0.00 Y400.00 D8.00 P15.00 H4 V1.00

G00 P00 X560.00 Y400.00 D8.30 P1

G02 L0 P00 X1300.00 Y400.00 D8.00 P15.00 H4 V1.00

G00 P00 X740.00 Y400.00 D8.40 P1

G02 L1 P00 X0.00 Y600.00 D8.00 P15.00 H2 V1.00

G00 P00 X560.00 Y600.00 D8.20 P1

G02 L0 P00 X1300.00 Y600.00 D8.00 P15.00 H2 V1.00

G06 P000 X1100.00 Y250.00 X800.00 V5.00 S3.30

G06 P000 X800.00 Y500.00 X400.00 V5.00 S3.30

G00 P00 X240.00 Y340.00 D8.30 P1

G00 P00 X272.00 Y340.00 D8.20 P1

G00 P00 X304.00 Y340.00 D8.10 P1

G00 P00 X1004.00 Y340.00 D8.30 P1

G00 P00 X1036.00 Y340.00 D8.20 P1

G00 P00 X1068.00 Y340.00 D8.10 P1

G00 P00 X248.00 Y100.00 D8.50 P1

G00 P00 X248.00 Y132.00 D8.40 P1

G00 P00 X248.00 Y164.00 D8.30 P1

G00 P00 X280.00 Y164.00 D8.20 P1

G00 P00 X312.00 Y164.00 D8.10 P1

@

% 100

#1 HHUS

#3 X680.00 Y540.00

#4 1

#5 0

G06 P100 X0.00 Y19.00 X0.00 V8.00 S3.20

G03 P001 X150.00 Y100.00 X150.00 D5.00 P2 S32.00

G03 P011 X150.00 Y150.00 X150.00 D5.00 P2 S32.00

@