Post Processor needed for Anderson Selexx

This forum is for requests and queries about machine tool support for Vectric Products
Post Reply
Branchy
Posts: 21
Joined: Wed Jun 20, 2012 3:54 am
Model of CNC Machine: SCM Record 2 and Procam
Location: Australia

Post Processor needed for Anderson Selexx

Post by Branchy »

I have an Anderson Selexx with a 9 Drill bank. Im currently using this post processor attached (which I have edited myself to iron out a few issues), I’m now wanting to use my drill block, only problem is… this post processor doesn’t pick up the required M88/M89. Also how would I set these drills up in the tool database in Vectric V9.0 to tell the post which drills to use? Also if I was to use multiple drills at once… Is this possible? The rest of the post processor works fine with the normal head routing profiles etc. Any help is appreciated :)
Attachments
Anderson_Selexx_Eco_ATC_mm_TR.PP
(12.79 KiB) Downloaded 344 times

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5887
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: Post Processor needed for Anderson Selexx

Post by Rcnewcomb »

You may need to contact Vectric support directly (suppport@vectric.com) I know they have done some work with drill banks in the past but have not released it as a standard feature.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

NHWOODWORKS
Posts: 1
Joined: Thu Mar 15, 2018 12:47 am
Model of CNC Machine: Anderson Selex 512, Shop Sabe IS 408
Location: Milford, NH
Contact:

Re: Post Processor needed for Anderson Selexx

Post by NHWOODWORKS »

Any luck finding a post for the Anderson Selexx? The ones I have found are all metric.

User avatar
SteveNelson46
Vectric Wizard
Posts: 2282
Joined: Wed Jan 04, 2012 2:43 pm
Model of CNC Machine: Camaster Stinger 1
Location: Tucson, Az.

Re: Post Processor needed for Anderson Selexx

Post by SteveNelson46 »

I think Steve Godding, AKA Dealguy, has that machine. You might send him a PM and see what he uses.
Steve

User avatar
Adrian
Vectric Archimage
Posts: 14544
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: Post Processor needed for Anderson Selexx

Post by Adrian »

NHWOODWORKS wrote:
Wed Jun 28, 2023 10:04 pm
Any luck finding a post for the Anderson Selexx? The ones I have found are all metric.
It's very easy to convert a metric post processor to imperial if that's the only thing that needs doing.

Post Reply