Boss CNC
-
- Posts: 10
- Joined: Mon Aug 29, 2011 5:27 pm
- Model of CNC Machine: CNC-Shark
- Location: Dallas, Texas
Boss CNC
I need to know what post processor to use to output gcode for a Boss CNC router. The machine does have a 8 station tool changer and if possible I would like to use the tool change but any post processor help would be appreciated.
-
- Vectric Wizard
- Posts: 1592
- Joined: Sun Sep 16, 2007 2:59 pm
- Model of CNC Machine: Custom DIY
- Location: Lake St Clair, MI, USA
- Contact:
Re: Boss CNC
Their website doesn't mention what control they are using. You need to know that to know which post to use.
Gerry - http://www.thecncwoodworker.com
Re: Boss CNC
Did you ever figure this out. I also have a Boss CNC Router & am having the same issue with my postscript. Boss Routers are made for EZ routers, however our Gcode is different. So when I run the EZ router post output, my CNC does all kinds of crazy soft limits errors and such.
Re: Boss CNC
Mach 3