photo vcarve PP for shark hd4

[deltagroove]

I am a nube, so sorry if this has been answered and I don't see it.. it seems that the post processors are machine specific, I don't have the shark HD4 in my processor list? I made a file and tried it the machine did nothing I tried the Gcode inch tap but no go , also I bought the laser bundle but don't see how to select it as a tool ?? first of many questions thanks in advance!!

[FixitMike]

Toward the bottom of this page: http://shop.nextwaveautomation.com/shop ... x?recid=26

[deltagroove]

I saved the post processor no problem but I have windows10 the tutorial does show how to add that? I looked and no luck

[Adrian]

It's the same in Windows 10 as in any other version of Windows.

Go to Open Application Data Folder on the File menu and then move the Post Processor file you downloaded from NextWave into the PostP folder.

[deltagroove]

in the photo vcarve that isn't there ? I have that in the vcarve 8.5 desktop but not in the PVC ?

[FixitMike]

in the photo vcarve that isn't there ? I have that in the vcarve 8.5 desktop but not in the PVC ?

Look in C:\Program Files (x86)\PhotoVCarve\PostP