Thank you very much for your reply. I have made some progress but still have a glitch to work out so I am updating the thread. I am curious and will try your PP soon and let you know how it worked.
To update the thread... There are several Masterwood PP provided by vectric I wasn't aware of due to the different naming sequence. There is a generic "Masterwood arc inch" and there are "MW-P415 ATC, MW- P416 ATC" Nothing like asking for something that is already right in front of your face. I modified the "Project 416" PP to now say "VAR Y_POSITION = [Y|C|Y|1.2|-1]" this corrected a problem I was experiencing with arcs going in the opposite direction. I got that info from http://forum.vectric.com/viewtopic.php?f=2&t=24428&hilit=masterwood
forum post. That poster suggested a solution that also included a change to the Y_HOME setting. I was unable to notice a difference one way or the other with this second setting. Can anybody else help shed some light on that particular setting and if change is needed or not? I am concerned it affects a function I am not using or contributing to my other problem...
The X and Y axis are switched. When I run a program like the sample grocery list project, all looks like it is supposed to except the project is running the width (4ft) of the CNC not the length (16ft) of it.
I am also no longer planning on selling the CNC. I sure would like to find a forum to connect with more Masterwood users though.
Thank you. Any help would be appreciated.