centroid wrap post processor

This forum is for requests and queries about machine tool support for Vectric Products
Post Reply
steveocnc
Posts: 5
Joined: Thu Aug 26, 2010 1:33 am

centroid wrap post processor

Post by steveocnc »

Hello I am looking for a post processor for the centroid control that will do wrapping? I use the centroid inch post now but not sure if it is complete to do wrapping ? I am new to trying a wrap and using the basic tutorials. I feel I need a post that says Centroid wrap to continue. please help if you know about this. SteveO

User avatar
IslaWW
Vectric Wizard
Posts: 1402
Joined: Wed Nov 21, 2007 11:42 pm
Model of CNC Machine: CNC Controller Upgrades
Location: Bergland, MI, USA

Re: centroid wrap post processor

Post by IslaWW »

Steve...
If there is not one for Centroid control in the drop list, I would contact support@vectric.com to see if one I available. If not you should be able to build one from an existing working postP.
Gary Campbell
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com

steveocnc
Posts: 5
Joined: Thu Aug 26, 2010 1:33 am

Re: centroid wrap post processor

Post by steveocnc »

Gary, once again you have helped. you helped me several years ago and appreciate your knowledge. I went ahead and used the link you sent me and waiting to see what happens. I just needed to be pointed in right direction and will surely save me time. again thanks for the help. very best SteveO

Post Reply