ShopBot Desktop post processor
-
David Corrigan
- Vectric Craftsman
- Posts: 218
- Joined: Fri Jul 11, 2014 3:45 pm
- Model of CNC Machine: ShopBot Desktop
ShopBot Desktop post processor
Can someone tell me what post processor to use for the ShopBot Desktop? It is not listed in the post processor list.
-
Adrian
- Vectric Archimage
- Posts: 14659
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: ShopBot Desktop post processor
Ideally it's "Shopbot TC(Inch)(*.sbp)" if it's not there then "ShopBot (arcs)(inch)(w/speed)(*.sbp)" should work ok.
The latest ShopBot specific Post Processors are always installed in the C:\sbparts folder on the PC that runs the SB3 software. They're in a folder called VCarvePro_forShopBotPosts, They can be copied from there to the PostP folder for Aspire. Click Open Application Data Folder from the Aspire File menu to get that open.
The latest ShopBot specific Post Processors are always installed in the C:\sbparts folder on the PC that runs the SB3 software. They're in a folder called VCarvePro_forShopBotPosts, They can be copied from there to the PostP folder for Aspire. Click Open Application Data Folder from the Aspire File menu to get that open.