I have a visual Mill post processor for a LNC M510i controller and need to convert this to work with Vectric software
where do I start or has anybody done this before.
I have read the P/P manual and slowly working on this.
Regards
Peter
How to convert a Visual Mill P/P
-
Tangocharlie123
- Posts: 7
- Joined: Sat Feb 19, 2011 3:34 pm
How to convert a Visual Mill P/P
- Attachments
-
- PreciseCamLNC1 - Copy.pp
- (19.15 KiB) Downloaded 278 times