TB6560-T4 Driver
-
- Posts: 2
- Joined: Thu Apr 19, 2012 4:28 pm
- Model of CNC Machine: Kit Bought on Internet TB6560-TC Driver
TB6560-T4 Driver
I recently purchased a 24X24 kit. The kit came with a power supply and a TB6560-T4 driver. On all my software they ask for the machine from a list. I don't know what to enter or what I should do to use my Mach 3 and V carve Pro software. Help is needed - Thank You
- Adrian
- Vectric Archimage
- Posts: 14660
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: TB6560-T4 Driver
As far as VCarve is concerned just use one of the Mach3 post processors ("Mach 2/3 Arcs Inch" for example.)
You're using Mach3 to control your machine and that's what VCarve produces files for. It's not concerned with the machine on the other end.
You're using Mach3 to control your machine and that's what VCarve produces files for. It's not concerned with the machine on the other end.