post procesor Comac FL26.09

This forum is for requests and queries about machine tool support for Vectric Products

post procesor Comac FL26.09

Postby galian » Wed Jan 11, 2012 12:39 am

Hello. I have a cnc fl.26.09 Comac with ilenia program and would like to know how to draw with vcarve, and to pass it on to the machine. can be done as a post processor for this machine. put file that reads the machine. thanks







ILEASC
[INFO]
RELEASE=1.0
REMARK=by -CAM/3- optimizer
[ISO:A:C00]
N10 G71 KA=1 LX=635.000 LY=405.000 LZ=19.500 HC1 L=PARLOAD
N20 L=C_INIT
N30 QX=0.000 QY=20.000 QZ=10.000 PMAN=22 VF=4.00 PRF=10.000 PTYP=1 L=C_DRILL P_FORCING_DOWN=0 $LATO="1" T22
N40 QX=20.000 QY=0.000 QZ=10.000 PMAN=31 VF=4.00 PRF=10.000 PTYP=1 L=C_DRILL P_FORCING_DOWN=0 $LATO="2" T31
N50 QX=635.000 QY=30.000 QZ=10.000 PMAN=21 VF=4.00 PRF=10.000 PTYP=1 L=C_DRILL P_FORCING_DOWN=0 $LATO="3" T21
N60 QX=605.000 QY=405.000 QZ=10.000 PMAN=32 VF=4.00 PRF=10.000 PTYP=1 L=C_DRILL P_FORCING_DOWN=0 $LATO="4" T32
N70 L=C_END
%
galian
 
Posts: 1
Joined: Sun Jan 08, 2012 11:40 pm
Model of CNC Machine: comac fl26.09

Return to Post Processors

Who is online

Users browsing this forum: No registered users and 3 guests