Hi Guys
I may need to get a new controller for my machine, It would need to cope with the following
Servo motors up to 20m per min on an 8*4 machine
6 unit tool change
Be windows based or work within windows
Have ready avail Vectric postscript file...
Be as user friendly as possible... e.g dont want to spend hours on G code
Any Ideas
Ian
CNC Contoller
-
- Vectric Craftsman
- Posts: 110
- Joined: Sun Mar 07, 2010 6:59 pm
- Location: St.Albans United Kingdom
- Contact:
CNC Contoller
Ian Jinks
www.ijcncservices.co.uk
www.ijcncservices.co.uk
- IslaWW
- Vectric Wizard
- Posts: 1403
- Joined: Wed Nov 21, 2007 11:42 pm
- Model of CNC Machine: CNC Controller Upgrades
- Location: Bergland, MI, USA
Re: CNC Contoller
Ian...
Mach, WinCNC and ShopBots SB3 will all do what you need. Prices vary with the product, as do the learning curve. IMHO SB3 is the most user intuitive interface, (no Gcode) but each has some features that the others do not.
disclaimer: Former SB user, now employee (somewhat biased)
Mach, WinCNC and ShopBots SB3 will all do what you need. Prices vary with the product, as do the learning curve. IMHO SB3 is the most user intuitive interface, (no Gcode) but each has some features that the others do not.
disclaimer: Former SB user, now employee (somewhat biased)
Gary Campbell
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com