Tony Mac wrote a post-processor for my Syntec controlled machine with ATC.... I have now tried it for several small jobs and tests and it works very well.
Althought I use it specifically with a MAXICAM machine having a rack-type ATC and Syntec controller running Syntec 900 ME, it should work with an Excitech router as well. However, trial is at your own risk.
In case other Vectric members have a need for it, they can retrieve it here http://dl.dropbox.com/u/2043845/Syntec_ ... _ATC_mm.pp
Cheers
ATC mm Post-processor for Syntec
- Norb
- Vectric Craftsman
- Posts: 200
- Joined: Wed Aug 05, 2009 8:07 pm
- Model of CNC Machine: MAXI-C 1530 SE-T-V
- Location: Barbados
ATC mm Post-processor for Syntec
Norbert
Aspire 4.x, PartMasterCAM Turn, Autocabinets
after hours: Sherline 2010 and 4410
Aspire 4.x, PartMasterCAM Turn, Autocabinets
after hours: Sherline 2010 and 4410