Sei 810 Peronnel Router

This forum is for requests and queries about machine tool support for Vectric Products

Sei 810 Peronnel Router

Postby OakeyDokey » Fri Jul 22, 2011 9:18 am

I am completely new to cnc and have just downloaded the trail version of cut2d. Sei is not listed on the choice of CNC machines. Does anyone out there have an Sei machine and a driver (if thats the right term) that I could down load.
OakeyDokey
 
Posts: 17
Joined: Wed Jul 20, 2011 8:04 pm
Model of CNC Machine: Sei 810 personel router

Re: Sei 810 Peronnel Router

Postby glenn » Sun Jul 24, 2011 2:24 am

Hi, If you don't have any luck with finding the correct driver, and you are getting into this cnc world at hobby level, I would suggest gutting it out and going with mach3 and an old pentium 4 tower, plenty of how-to help on the mach forum
http://www.machsupport.com/forum/index.php and in the end, you will have a really nice machine with easy to understand and use controls from a common system type g-code.
Good luck,
Glenn
User avatar
glenn
Vectric Wizard
 
Posts: 582
Joined: Wed Jul 02, 2008 11:23 pm
Location: McArthur, Ohio U.S.A.
Model of CNC Machine: home brew 40x20

Re: Sei 810 Peronnel Router

Postby OakeyDokey » Mon Jul 25, 2011 9:01 am

Hi Glenn,
Thanks for your response. Mach 3's always an option, but it seems an expensive one at the moment.
Thanks,
Paul
OakeyDokey
 
Posts: 17
Joined: Wed Jul 20, 2011 8:04 pm
Model of CNC Machine: Sei 810 personel router


Return to Post Processors

Who is online

Users browsing this forum: No registered users and 2 guests