Hello,
I need a post processor for my WINPCNC Economy Edition. Any ideas would be great...
Thanks.
Regards,
VVolverine
Post Processor for WinPCNC Economy
-
- Posts: 11
- Joined: Sun May 22, 2011 1:07 pm
- Model of CNC Machine: High-Z S-1000
- capnl
- Vectric Wizard
- Posts: 416
- Joined: Thu Sep 25, 2008 4:31 pm
- Model of CNC Machine: Heiz Z-1000
- Location: The Netherlands - Zuidland (3214)
- Contact:
Re: Post Processor for WinPCNC Economy
you should use:
G Code (mm) (*.tap)
works for me
have fun,
John
G Code (mm) (*.tap)
works for me
have fun,
John
DRW-Holland
CNC-Step S-1000 machine 1000 x 590 x 110 mm
Aspire - VCarve Pro - Photo VCarve - Cut3D
CNC-Step S-1000 machine 1000 x 590 x 110 mm
Aspire - VCarve Pro - Photo VCarve - Cut3D
Re: Post Processor for WinPCNC Economy
You can also use:
Photo V Carve: MultiCam Plt mm (*plt)
V Carve Pro: WinPC NC (*nc)
Cheers,
Morné
Photo V Carve: MultiCam Plt mm (*plt)
V Carve Pro: WinPC NC (*nc)
Cheers,
Morné
-
- Posts: 11
- Joined: Sun May 22, 2011 1:07 pm
- Model of CNC Machine: High-Z S-1000
Re: Post Processor for WinPCNC Economy
Hi,
thanks for the answers. I will test it.
Regards,
VVolverine
thanks for the answers. I will test it.
Regards,
VVolverine