Anderson Exact
Anderson Exact
I don't see any Post Processors listed for Anderson Exact any help would be nice! Thanks
- andyb
- Vectric Wizard
- Posts: 301
- Joined: Fri Jun 02, 2006 2:11 am
- Model of CNC Machine: MultiCAM, Shopbot PRTAlpha
- Location: Oakwood, GA
- Contact:
Re: Anderson Exact
You may want to try sending an email to support (support@vectric.com). Mark should be able to help you out.
Andy B.
Andy B.
[b]Oak Branch Manufacturing[/b]
andy@oakbranchmfg.com
678-971-5502
[url]http://www.oakbranchmfg.com[/url]
andy@oakbranchmfg.com
678-971-5502
[url]http://www.oakbranchmfg.com[/url]
Re: Anderson Exact
Still needing to find a post processor that works with Anderson Exact in Standard non metric. Any other ideas?
-
- Vectric Wizard
- Posts: 823
- Joined: Tue Jun 01, 2010 4:51 pm
- Model of CNC Machine: CAMaster MC4848
- Location: Prescott AZ
Re: Anderson Exact
Since this is a Vectric forum I 'am assuming you are using one of their products. They have many post processors available and if they don't have the one you need they might know where you can find it.
Andy's suggestion is probably a good one or at least a place to start.
Good luck.
Mark
Andy's suggestion is probably a good one or at least a place to start.
Good luck.
Mark
Re: Anderson Exact
yes we are trying to get vectric to work before we buy it, probably photo v-carve maybe others looks pretty nice just wish we could get a post processor to test it out!