Anderson Exact

This forum is for requests and queries about machine tool support for Vectric Products

Anderson Exact

Postby sealy » Mon Apr 18, 2011 10:46 pm

I don't see any Post Processors listed for Anderson Exact any help would be nice! Thanks
sealy
 
Posts: 7
Joined: Fri Apr 15, 2011 8:54 pm
Model of CNC Machine: Anderson Exact

Re: Anderson Exact

Postby andyb » Tue Apr 19, 2011 1:46 am

You may want to try sending an email to support (support@vectric.com). Mark should be able to help you out.

Andy B.
[b]Oak Branch Manufacturing[/b]
andy@oakbranchmfg.com
678-971-5502
[url]http://www.oakbranchmfg.com[/url]
User avatar
andyb
Vectric Wizard
 
Posts: 300
Joined: Fri Jun 02, 2006 2:11 am
Location: Oakwood, GA
Model of CNC Machine: MultiCAM, Shopbot PRTAlpha

Re: Anderson Exact

Postby sealy » Mon Apr 25, 2011 5:29 pm

Still needing to find a post processor that works with Anderson Exact in Standard non metric. Any other ideas?
sealy
 
Posts: 7
Joined: Fri Apr 15, 2011 8:54 pm
Model of CNC Machine: Anderson Exact

Re: Anderson Exact

Postby MarkJohnston » Mon Apr 25, 2011 6:40 pm

Since this is a Vectric forum I 'am assuming you are using one of their products. They have many post processors available and if they don't have the one you need they might know where you can find it.
Andy's suggestion is probably a good one or at least a place to start.

Good luck.
Mark
MarkJohnston
Vectric Wizard
 
Posts: 808
Joined: Tue Jun 01, 2010 4:51 pm
Location: Prescott AZ
Model of CNC Machine: CAMaster MC4848

Re: Anderson Exact

Postby sealy » Fri May 13, 2011 7:07 am

yes we are trying to get vectric to work before we buy it, probably photo v-carve maybe others looks pretty nice just wish we could get a post processor to test it out!
sealy
 
Posts: 7
Joined: Fri Apr 15, 2011 8:54 pm
Model of CNC Machine: Anderson Exact


Return to Post Processors

Who is online

Users browsing this forum: No registered users and 2 guests