imprting tool path from PhotoV carve to V carve

This forum is for requests and queries about machine tool support for Vectric Products

imprting tool path from PhotoV carve to V carve

Postby prempadma » Sun Feb 13, 2011 8:42 pm

Can some one tell me how to imprt the toolpath from photoV carve to V carve.
Thanks
prempadma
prempadma
 
Posts: 2
Joined: Wed Feb 02, 2011 1:57 am

Re: imprting tool path from PhotoV carve to V carve

Postby tmerrill » Sun Feb 13, 2011 8:47 pm

Look at the bottom tutorial, #9, on this page:

http://www.vectric.com/WebSite/Vectric/ ... esign.html

There is both a video and written document and these should get you going in the right direction.

Tim
tmerrill
Vectric Archimage
 
Posts: 4794
Joined: Thu May 18, 2006 3:24 pm
Location: North Carolina
Model of CNC Machine: ShopBot

Re: imprting tool path from PhotoV carve to V carve

Postby edokus » Fri Aug 12, 2011 3:25 pm

I've encountered the same problem. The solution offered in the tutorial video doesn't work, the "save as" function is grayed out.
edokus
 
Posts: 10
Joined: Thu Aug 11, 2011 8:33 pm
Model of CNC Machine: Shark pro

Re: imprting tool path from PhotoV carve to V carve

Postby Adrian » Fri Aug 12, 2011 3:33 pm

Are you using the trial version? I think the Save As only works in the full version.
User avatar
Adrian
Vectric Archimage
 
Posts: 10086
Joined: Thu Nov 23, 2006 2:19 pm
Location: Surrey, UK
Model of CNC Machine: ShopBot PRS Alpha 96x48


Return to Post Processors

Who is online

Users browsing this forum: No registered users and 3 guests