X Y axis reversed on rotary file

Topics related to wrapped rotary machining in Aspire or VCarve Pro
Post Reply
User avatar
Phil
Vectric Wizard
Posts: 3026
Joined: Thu Nov 17, 2005 10:56 pm
Location: Pittsfield, MA

X Y axis reversed on rotary file

Post by Phil »

I just set up my new rotary indexer. I set the file up to run in the X axis. I used the wrapping gadget and selected the raster machining method. The indexer is rotating 360 degrees, the router is advancing in the Y axis about 0.1" and not at all in the X axis.
Before connecting the indexer I have run the machine for about 16 years without any similar issues. Something is wrong and I don't know where to look.
The machine is a Shopbot Benchtop PRT, 4G.

Phil

User avatar
Phil
Vectric Wizard
Posts: 3026
Joined: Thu Nov 17, 2005 10:56 pm
Location: Pittsfield, MA

Re: X Y axis reversed on rotary file

Post by Phil »

I think the problem is with the Post Processor. The preview in Aspire looks fine. The Shopbot software has it's own previewer which shows a different preview than Aspire. There is only one PP indexer for Shopbots.

Phil

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5887
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: X Y axis reversed on rotary file

Post by Rcnewcomb »

There is only one PP indexer for Shopbots.
It is very easy to modify or clone a post processor. It is just a text file that you can edit using Notepad. I can walk you through the process.

Is the indexer parallel to the X axis or Y axis?
Is it set up on the A or B axis?
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

User avatar
Phil
Vectric Wizard
Posts: 3026
Joined: Thu Nov 17, 2005 10:56 pm
Location: Pittsfield, MA

Re: X Y axis reversed on rotary file

Post by Phil »

My indexer is parallel to the X axis.

Thanks

Phil

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5887
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: X Y axis reversed on rotary file

Post by Rcnewcomb »

It looks like ShopBot tech support got you up and running. Let me know if you need anything further.

(Their support really is top notch)
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

User avatar
Phil
Vectric Wizard
Posts: 3026
Joined: Thu Nov 17, 2005 10:56 pm
Location: Pittsfield, MA

Re: X Y axis reversed on rotary file

Post by Phil »

I would still like to learn how to write/edit post processors. Do you have a source?

Phil

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5887
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: X Y axis reversed on rotary file

Post by Rcnewcomb »

I would still like to learn how to write/edit post processors. Do you have a source?
Help/Post Processor Editing Guide
HelpPostProcessorEditingGuide.png
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

Post Reply