Hey All,
With the release of 9.5 we have created a set of new tutorials to help you get on your way with rotary projects you can find them here:
https://support.vectric.com/tutorials/V ... rds=rotary
Thanks,
Rotary Specific Tutorials
-
- Vectric Staff
- Posts: 338
- Joined: Fri Jun 01, 2012 1:30 pm
- Model of CNC Machine: Various
- Location: Redditch, UK
- Contact:
Rotary Specific Tutorials
Beki
Senior Application Engineer - Vectric Ltd.
Senior Application Engineer - Vectric Ltd.
Re: Rotary Specific Tutorials
Thanks Rebecca,
I was so involved in a model I was doing when V.9.5 came out that I posted there as a problem. I wished I saw these videos before I posted about any problem few days ago. After watching the video, I re-did a table leg, which took a fraction of the time and only shows how Aspire is the greatest software out there.
Gary
I was so involved in a model I was doing when V.9.5 came out that I posted there as a problem. I wished I saw these videos before I posted about any problem few days ago. After watching the video, I re-did a table leg, which took a fraction of the time and only shows how Aspire is the greatest software out there.
Gary
-
- Vectric Staff
- Posts: 338
- Joined: Fri Jun 01, 2012 1:30 pm
- Model of CNC Machine: Various
- Location: Redditch, UK
- Contact:
Re: Rotary Specific Tutorials
Hey Gary,
Sorry for the late reply, this has somehow slipped my radar! Glad you benefited from the tutorials, thank you for your kind comments!
Sorry for the late reply, this has somehow slipped my radar! Glad you benefited from the tutorials, thank you for your kind comments!
Beki
Senior Application Engineer - Vectric Ltd.
Senior Application Engineer - Vectric Ltd.