Table Leg using Aspire 9.5

Topics related to wrapped rotary machining in Aspire or VCarve Pro

Table Leg using Aspire 9.5

Postby Rcnewcomb » Sun Sep 02, 2018 1:25 am

Table leg: 22" long, 3.25" diameter, Douglas Fir, 0.5" end mill for roughing, 0.25" ballnose for finish. About 2.5 hours machine time at 180 IPM XY & Z.
LegRoughIMG_3245.jpg

LegNearlyDoneIMG_3252.jpg

LegDoneIMG_3260.JPG
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 3071
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC

Re: Table Leg using Aspire 9.5

Postby 4DThinker » Sun Sep 02, 2018 1:42 am

Best use for a 4x4 ever! Well done! :)
4DThinker
Vectric Wizard
 
Posts: 1122
Joined: Sun Sep 23, 2012 12:14 pm
Model of CNC Machine: CNC Shark Pro

Re: Table Leg using Aspire 9.5

Postby highpockets » Sun Sep 02, 2018 2:05 am

Wow! Nice work.... I'm very envious of your 4th axis :D
John
Maker of Chips
User avatar
highpockets
Vectric Wizard
 
Posts: 1775
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Table Leg using Aspire 9.5

Postby Rcnewcomb » Sun Sep 02, 2018 5:19 am

5 seconds of video showing the cutting: Table Leg with Aspire 9.5
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 3071
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC

Re: Table Leg using Aspire 9.5

Postby IslaWW » Sun Sep 02, 2018 5:26 am

Randall...
I'm going to have to buy you a few minutes so that you can post a video that's 20 or 30 seconds. :P :P
Gary Campbell
CNC Technology & Training
The Ultimate Woodworking Machine
GCnC411 (at) gmail.com
User avatar
IslaWW
Vectric Wizard
 
Posts: 1110
Joined: Wed Nov 21, 2007 11:42 pm
Location: Marquette, MI, USA
Model of CNC Machine: The Ultimate Woodworking Machine

Re: Table Leg using Aspire 9.5

Postby RebeccaJ » Wed Sep 05, 2018 9:07 am

Very Nice Randall!
Thanks for sharing!
Beki Jeremy
Senior Application Engineer - Vectric Ltd.
RebeccaJ
Vectric Staff
 
Posts: 139
Joined: Fri Jun 01, 2012 1:30 pm
Location: Redditch, UK
Model of CNC Machine: Various


Return to Wrapped Rotary Machining

Who is online

Users browsing this forum: rlp17820 and 2 guests