Hello,
Just inquiring as to the feasibility of using Aspire 9 and a machine like the Laguna Rotary CNC Lathe to create something like this sword from the 3D Warehouse:
https://3dwarehouse.sketchup.com/model/ ... en-Destiny
Obviously it would be a slightly simplified design. Thoughts?
Thanks!
Make a sword with a CNC turner?
- IslaWW
- Vectric Wizard
- Posts: 1402
- Joined: Wed Nov 21, 2007 11:42 pm
- Model of CNC Machine: CNC Controller Upgrades
- Location: Bergland, MI, USA
Re: Make a sword with a CNC turner?
The blade will be too thin to machine accurately between centers. Think if this as a 2 sided job on the table
Gary Campbell
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com
- rscrawford
- Vectric Wizard
- Posts: 1104
- Joined: Mon Jan 17, 2011 6:49 pm
- Model of CNC Machine: CAMaster Cobra 408 ATC, ShopSabre IS408
- Location: Wetaskiwin, Alberta
- Contact:
Re: Make a sword with a CNC turner?
Swords are very easy as a two sided project on a flat table. I've made many for my boys and my nephews.
The picture below is a very simple sword I made several years ago using a dragon file I purchased (my young son picked out the dragon and wanted me to make a sword using it).
The picture below is a very simple sword I made several years ago using a dragon file I purchased (my young son picked out the dragon and wanted me to make a sword using it).
Russell Crawford
http://www.cherryleaf-rustle.com
http://www.cherryleaf-rustle.com