Yes it was. I will try and answer a few more that I went by earlier because you seemed to be making statements rather questions.
First and foremost, SSB tech support should be the goto source for information on most of these, but I do have a few bits of info that can get you pointed in the right direction.
Of course you need a rotary wrapped post processor for rotary work when using Vectric products.
Mounting is in many cases "at user option", maybe SS has some options other than the one you show.
It is possible to have the XY feedrate converted to rotary when using WinCNC control. It may not be included in the postP you have, but it is not a difficult modification.
When you say "crank her up a bit" are you referring to XY or A, feeds or rapids?
You can, with a few modifications, implement continuous rotary turning to develop rotary shapes: https://youtu.be/9bLnP9R7bE0
That's all that I could guess could be questions, unless you wish to ask more, or need clarification.