Linux CNC / EMC2 Processors

Topics related to wrapped rotary machining in Aspire or VCarve Pro

Linux CNC / EMC2 Processors

Postby Askjerry » Sun Sep 14, 2014 11:18 pm

I have a Wells Index CNC (looks like a large Bridgeport) that I am running with Linux CNC. I made two processors, one for X/Y/Z and the other for X/Y/Z/A that has the A wrapped around the X-axis. So far it has tested quite well... and I can run both wrapped and unwrapped G-Code at the same time.

In other words... I can do a 3D job, and I can also do simple cuts, pockets, etc... I can paste G-Gode together and get quite a lot done.

Since I went through the trouble to configure it properly to send all the G and M codes to start the spindle, set the coolant, etc... I figured I would make them available to anyone who wants them.

The 3-Axis, X/Y/Z version: http://rutherford-robotics.com/DLOAD/G-CODE/Wells%20Index%20(XYZ)%20V1.pp

The 4-Axis X/Y/Z/A version: http://rutherford-robotics.com/DLOAD/G-CODE/Wells%20Index%20(XYZA)%20V1.pp

Here is a demo of it doing a complex job: https://www.youtube.com/watch?v=g-5OSW5edEs&list=PL3A9590BD3BD2E76C

I hope you find it helpful.
Jerry
User avatar
Askjerry
Vectric Apprentice
 
Posts: 3
Joined: Sun Jun 23, 2013 12:46 am
Location: Kyle, Texas
Model of CNC Machine: Multiple

Re: Linux CNC / EMC2 Processors

Postby frank131313 » Mon Apr 10, 2017 3:19 am

impressive ! :shock: :!: very good
frank131313
Vectric Apprentice
 
Posts: 17
Joined: Sat Dec 24, 2016 5:25 am
Model of CNC Machine: biesse rover 30L2

Re: Linux CNC / EMC2 Processors

Postby AcBCDN » Tue Apr 11, 2017 7:42 pm

Askjerry wrote:I have a Wells Index CNC (looks like a large Bridgeport) that I am running with Linux CNC. I made two processors, one for X/Y/Z and the other for X/Y/Z/A that has the A wrapped around the X-axis. So far it has tested quite well... and I can run both wrapped and unwrapped G-Code at the same time.

In other words... I can do a 3D job, and I can also do simple cuts, pockets, etc... I can paste G-Gode together and get quite a lot done.

Since I went through the trouble to configure it properly to send all the G and M codes to start the spindle, set the coolant, etc... I figured I would make them available to anyone who wants them.

The 3-Axis, X/Y/Z version: http://rutherford-robotics.com/DLOAD/G-CODE/Wells%20Index%20(XYZ)%20V1.pp

The 4-Axis X/Y/Z/A version: http://rutherford-robotics.com/DLOAD/G-CODE/Wells%20Index%20(XYZA)%20V1.pp

Here is a demo of it doing a complex job: https://www.youtube.com/watch?v=g-5OSW5edEs&list=PL3A9590BD3BD2E76C

I hope you find it helpful.
Jerry


Link seems to be problem. :(
AcBCDN
 
Posts: 20
Joined: Wed Jul 16, 2014 5:49 am
Model of CNC Machine: HomeBuilt


Return to Wrapped Rotary Machining

Who is online

Users browsing this forum: No registered users and 2 guests