Hi all,
How do I know if I have a post processor for my recoil?I am currently using "CAMaster_X3_Arcs_inch.pp" for all table top work.
I am also trying to find a tutorial for doing a "touch top" on the recoil.I keep being pushed to 222artisans,leaving me to believe that I am clearly not understanding something or I just don't get the lingo.
Any help would be great.
Thanks again,
Doug
CAMaster Post Processor
-
- Posts: 22
- Joined: Fri May 27, 2011 11:24 pm
- Model of CNC Machine: CAMaster Cobra CR-408 X3
- Location: New York
CAMaster Post Processor
Froopita
-
- Vectric Craftsman
- Posts: 270
- Joined: Thu Dec 03, 2009 7:36 am
- Model of CNC Machine: CAMaster 508 ATC + Rotary
- Location: Snohomish, WA
- Contact:
Re: CAMaster Post Processor
Doug,
I replied to your post on the CAMaster forum but just in case I will post it here.
I replied to your post on the CAMaster forum but just in case I will post it here.
- Attachments
-
- CAMaster XtoA.pp
- (3.76 KiB) Downloaded 301 times
Mick Martin
Aspire 4.015
http://mickmartinwoodworking.com/
Aspire 4.015
http://mickmartinwoodworking.com/