Make a sword with a CNC turner?

Topics related to wrapped rotary machining in Aspire or VCarve Pro

Make a sword with a CNC turner?

Postby BlueHeron » Thu Aug 09, 2018 8:35 pm

Hello,

Just inquiring as to the feasibility of using Aspire 9 and a machine like the Laguna Rotary CNC Lathe to create something like this sword from the 3D Warehouse:

https://3dwarehouse.sketchup.com/model/ ... en-Destiny

Obviously it would be a slightly simplified design. Thoughts?

Thanks!
BlueHeron
 
Posts: 2
Joined: Mon Jun 11, 2018 10:45 pm
Model of CNC Machine: Laguna CNC 46" Turner 3 hp spindle

Re: Make a sword with a CNC turner?

Postby IslaWW » Thu Aug 09, 2018 9:42 pm

The blade will be too thin to machine accurately between centers. Think if this as a 2 sided job on the table
Gary Campbell
CNC Technology & Training
The Ultimate Woodworking Machine
GCnC411 (at) gmail.com
User avatar
IslaWW
Vectric Wizard
 
Posts: 1133
Joined: Wed Nov 21, 2007 11:42 pm
Location: Marquette, MI, USA
Model of CNC Machine: The Ultimate Woodworking Machine

Re: Make a sword with a CNC turner?

Postby rscrawford » Sun Aug 12, 2018 4:37 pm

Swords are very easy as a two sided project on a flat table. I've made many for my boys and my nephews.

The picture below is a very simple sword I made several years ago using a dragon file I purchased (my young son picked out the dragon and wanted me to make a sword using it).

sword1.JPG
Russell Crawford
http://www.cherryleaf-rustle.com
User avatar
rscrawford
Vectric Wizard
 
Posts: 866
Joined: Mon Jan 17, 2011 6:49 pm
Location: Wetaskiwin, Alberta
Model of CNC Machine: CAMaster Cobra 408 ATC with recoil


Return to Wrapped Rotary Machining

Who is online

Users browsing this forum: No registered users and 3 guests