Design & Carve Series 1 - Wildlife Scenes

Discussions and examples relating to the Design & Carve series for Aspire

Moderator: JamesB

Design & Carve Series 1 - Wildlife Scenes

Postby JamesB » Wed Jul 22, 2009 8:09 pm

Here is a little more information on our new product - "Design & Carve Series 1 - Wildlife Scenes". This drip feed of info is not deliberate, we were so busy getting the product ready for the show that the plan for stocking and sales through the website was not in place and since returning I have been slammed with catching up. Excuses aside the attached PDF should help to give an overview of the new product. The revised plan is to get this up on the website and ready for sale by the middle of next week (I forgot I need to get the disks in stock with our shipper in Chicago hence the delay).

This new product is specifically for Aspire users and is a combination of clipart, CRV3D projects and video tutorials showing you how to get the most from the artwork and ideas. Price for this new product will be US$495 but we will be having an introductory offer for current Aspire users so keep an eye out here for announcements. That's all for now... thanks for your interest and patience.
Cheers,
James
Attachments
DC1-Wildlife-Flyer.pdf
(1.62 MiB) Downloaded 1923 times
User avatar
JamesB
Vectric Alumni
 
Posts: 1248
Joined: Tue May 30, 2006 1:24 pm
Location: Warwickshire, UK
Model of CNC Machine: None

Re: WOW

Postby Rcnewcomb » Wed Jul 22, 2009 10:06 pm

Just what I was looking for....
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 2691
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: Shopbot, CAMaster

Re: WOW

Postby JamesB » Wed Jul 29, 2009 7:17 pm

I am embarressed to report this is still not ready for official launch/sales. I am guessing realistically it will now be available on Monday. I would go on to list the reasons why but they will sound like excuses (which they probably are)!

Anyway I appreciate the continued patience and only hope it will be worth the wait.

Regards,
James
User avatar
JamesB
Vectric Alumni
 
Posts: 1248
Joined: Tue May 30, 2006 1:24 pm
Location: Warwickshire, UK
Model of CNC Machine: None

Re: WOW

Postby GripUs » Wed Jul 29, 2009 8:19 pm

Patience? We ain't got no stinkin' patience!

My apologies to Mel Brooks and "Blazing Saddles." :roll:

Joe
Ham and eggs - Inconvenient for the chicken. A total commitment for the pig.
http://www.gripus.com/
User avatar
GripUs
Vectric Wizard
 
Posts: 794
Joined: Thu Jan 18, 2007 2:07 pm
Location: San Angelo, Texas

Re: WOW

Postby JamesB » Wed Aug 05, 2009 7:13 pm

I am pleased to announce that finally the new product is available from the website. You can read more about it, download a detailed PDF (which is also available below) and watch an overview video here:

http://www.vectorart3d.com/index.cfm/DC1_Wildlife.htm

Thanks again for your patience (apart from Joe and Mel Brooks :) )

We'll send out an official email announcement later this afternoon.

Cheers,
James
Attachments
DC1-Wildlife-LR.pdf
Details PDF Document
(1.62 MiB) Downloaded 667 times
User avatar
JamesB
Vectric Alumni
 
Posts: 1248
Joined: Tue May 30, 2006 1:24 pm
Location: Warwickshire, UK
Model of CNC Machine: None

Re: WOW

Postby Rcnewcomb » Wed Aug 05, 2009 8:08 pm

This is a marvelous looking package. :D :D :D
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 2691
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: Shopbot, CAMaster

Re: WOW

Postby tmerrill » Wed Aug 05, 2009 8:45 pm

James,

Very impressive!

I know you have a winner here. Watching the inbox closely.

Tim
tmerrill
Vectric Archimage
 
Posts: 4794
Joined: Thu May 18, 2006 3:24 pm
Location: North Carolina
Model of CNC Machine: ShopBot

Re: WOW

Postby rdhharm » Thu Aug 06, 2009 2:28 am

James,

Very nice I can't wait to try some of these and I am sure our customers will appreciate all of the hard work you and your team have put into these. I see a lot ways to use the wild life and scenes in this new software package you have.

Rick
rdhharm
Vectric Apprentice
 
Posts: 88
Joined: Wed Mar 21, 2007 3:03 am
Location: Allendale, MI

Re: WOW

Postby jhegel » Thu Aug 06, 2009 4:33 am

It's on order, I have to leave town for a few days, if I am lucky it will be here when I get back.

John
jhegel
 
Posts: 38
Joined: Wed Jan 14, 2009 5:02 pm
Location: Ronan, Mt

Re: WOW

Postby rdhharm » Tue Aug 11, 2009 1:44 am

Kent,

WOW is right mine came today and it is awesome.

James you did a fantastic job, I really like the tutorials.

Can’t wait to try these out on a piece of wood,

Kent have you cut any of these yet?

Rick
rdhharm
Vectric Apprentice
 
Posts: 88
Joined: Wed Mar 21, 2007 3:03 am
Location: Allendale, MI


Return to Design & Carve - Aspire

Who is online

Users browsing this forum: No registered users and 1 guest