D C wildlife

Discussions and examples relating to the Design & Carve series for Aspire

Moderator: JamesB

D C wildlife

Postby dan nelson » Sun Dec 15, 2013 5:23 pm

I'm going to buy D C wildlife scenes however I noticed the the bear that I need is not shown ion the models but in the advertising, it the one pictured next to the cd on the home page. Am I missing something? Does this model have to be purchased in addition to dc1 and can it be dropped into a scene ? I can cut models apart in aspire is this what I have to do ? Thanks Dan
dan nelson
Vectric Craftsman
 
Posts: 135
Joined: Sun Dec 20, 2009 4:44 pm
Location: palmyra wi
Model of CNC Machine: Camaster stinger III x3 with recoil lath

Re: D C wildlife

Postby dan nelson » Sun Dec 15, 2013 5:36 pm

Yes on the dc home page click on view details than to the left of the dc1 cd pictured is a walking bear scene
dan nelson
Vectric Craftsman
 
Posts: 135
Joined: Sun Dec 20, 2009 4:44 pm
Location: palmyra wi
Model of CNC Machine: Camaster stinger III x3 with recoil lath

Re: D C wildlife

Postby Adrian » Sun Dec 15, 2013 5:38 pm

I've got DC1 and I've just gone through all the models, tutorials and bonus scenes without being able to see that bear. Pretty sure it's not included or it's very well hidden!
User avatar
Adrian
Vectric Archimage
 
Posts: 7404
Joined: Thu Nov 23, 2006 2:19 pm
Location: Surrey, UK
Model of CNC Machine: ShopBot PRS Alpha 96x48

Re: D C wildlife

Postby dan nelson » Sun Dec 15, 2013 5:41 pm

Could you reply to my other questions also
dan nelson
Vectric Craftsman
 
Posts: 135
Joined: Sun Dec 20, 2009 4:44 pm
Location: palmyra wi
Model of CNC Machine: Camaster stinger III x3 with recoil lath

Re: D C wildlife

Postby Adrian » Sun Dec 15, 2013 5:46 pm

Any VectortArt3D model (or any you create yourself) can be combined with the other supplied models/scenes in DC. You can also use the Aspire tools to modify the models so you could convert the standing bear into a walking one.
User avatar
Adrian
Vectric Archimage
 
Posts: 7404
Joined: Thu Nov 23, 2006 2:19 pm
Location: Surrey, UK
Model of CNC Machine: ShopBot PRS Alpha 96x48

Re: D C wildlife

Postby dan nelson » Sun Dec 15, 2013 6:33 pm

Thanks for the info
dan nelson
Vectric Craftsman
 
Posts: 135
Joined: Sun Dec 20, 2009 4:44 pm
Location: palmyra wi
Model of CNC Machine: Camaster stinger III x3 with recoil lath

Re: D C wildlife

Postby JamesB » Mon Dec 16, 2013 11:32 am

Hi Dan,

The specific model is not included in the standard models on the DC disk so it must be a project created by a customer who has added that in themselves - ordinarily this would require additional purchase - it was not intended to mislead though and had we noticed we would not have used that image! However, as the bear is a model I created myself many years ago I have added it to the Additional Resources page for Design and Carve customers: http://www.designandcarve.com/library/

So now this is a model you will have access to (for free) when you purchase the disk and we have tagged your online account. Any existing Design and Carve customers can also login and access this (if their account is tagged - email us if not). Hopefully this is a good solution all round.

Regards,
James
User avatar
JamesB
Vectric Alumni
 
Posts: 1248
Joined: Tue May 30, 2006 1:24 pm
Location: Warwickshire, UK
Model of CNC Machine: None

Re: D C wildlife

Postby MarkJohnston » Mon Dec 16, 2013 4:54 pm

Thanks James I was looking for a bear like that the other day and now I have one. Still looking forward to a new Design and Carve Series. I have both of the other ones and use them quite a lot.

Have a great Christmas.

Mark
MarkJohnston
Vectric Wizard
 
Posts: 747
Joined: Tue Jun 01, 2010 4:51 pm
Location: Prescott AZ
Model of CNC Machine: CAMaster MC4848

Re: D C wildlife

Postby mikeacg » Mon Dec 16, 2013 5:05 pm

James,

I've been trying to send you a PM but the system says you don't exist! I need to talk to you about my Wildlife disk...

I went to the website and sent the email! Thanks!

Mike
User avatar
mikeacg
Vectric Wizard
 
Posts: 612
Joined: Sun Nov 02, 2008 10:53 pm
Location: Newberry, MI
Model of CNC Machine: Camaster Stinger, Sidewinder, SB 4x4

Re: D C wildlife

Postby JamesB » Tue Dec 17, 2013 11:01 am

Mark - thanks for the gentle reminder. We are making slow but steady progress, no news yet though...

Mike - you should be able to PM me, not sure why that did not work. Someone in Support will be replying to you though today.

Thanks,
James
User avatar
JamesB
Vectric Alumni
 
Posts: 1248
Joined: Tue May 30, 2006 1:24 pm
Location: Warwickshire, UK
Model of CNC Machine: None

Re: D C wildlife

Postby mikeacg » Tue Dec 17, 2013 2:07 pm

User error, James! I think I have it figured out now...

Mark Moran sent me an email and explained the issue to me. This might be a good learning experience for others! What is the proper procedure for transferring ownership of Vectric properties?

I appreciate your going the extra mile for me James! I owe you!

Mike :)
User avatar
mikeacg
Vectric Wizard
 
Posts: 612
Joined: Sun Nov 02, 2008 10:53 pm
Location: Newberry, MI
Model of CNC Machine: Camaster Stinger, Sidewinder, SB 4x4

Re: D C wildlife

Postby JamesB » Thu Dec 19, 2013 2:53 pm

In terms of transferring ownership of Vectric software then the details are here: http://support.vectric.com/aspire-quest ... fer-policy

With regard to Design and Carve it is in effect content not software and is governed by the Vector Art 3D License Agreement http://www.vectorart3d.com/license - so ownership cannot be transferred to someone else as per the downloads and other 3D collections.

Thanks,
James
User avatar
JamesB
Vectric Alumni
 
Posts: 1248
Joined: Tue May 30, 2006 1:24 pm
Location: Warwickshire, UK
Model of CNC Machine: None


Return to Design & Carve - Aspire

Who is online

Users browsing this forum: No registered users and 1 guest