Here are some things that I cut from the Design & Carve packages to sale at a local festival. We got a lot of comments on the carvings. We were asked by a promoter for another festival to participate in their November festival to show our work.
The Forrest, Mountain and Waterfall scenes were all cut with a 1/4" ballnose. We attached a frame around them then stained. Quick note on the Mountain Scene, the carving has lines in it like the stepover was set to high. Not sure why but the effect is really neat if you see it in person.
The Cattle Drive scene is a coat rack. Cut with a 1/8" ballnose. Will left the hangers off to offer the purchaser to pick between several different styles of hooks that we had.
We had two of the Cowboy Fences. One we added hooks to for a key rack. Both cut with an 1/8" ballnose.
The Leafman is 1.5" thick Maple. Cut with an 1/8" ballnose.
Andy B.
Design & Carve Projects and Scenes
Moderator: Todd Bailey
- andyb
- Vectric Wizard
- Posts: 301
- Joined: Fri Jun 02, 2006 2:11 am
- Model of CNC Machine: MultiCAM, Shopbot PRTAlpha
- Location: Oakwood, GA
- Contact:
Design & Carve Projects and Scenes
[b]Oak Branch Manufacturing[/b]
andy@oakbranchmfg.com
678-971-5502
[url]http://www.oakbranchmfg.com[/url]
andy@oakbranchmfg.com
678-971-5502
[url]http://www.oakbranchmfg.com[/url]
- RoutnAbout
- Vectric Wizard
- Posts: 2087
- Joined: Mon Sep 19, 2005 11:09 pm
- Model of CNC Machine: 24x18 Desktop
- Location: North Manchester, Indiana
Re: Design & Carve Projects and Scenes
As always Andy, they look great, and it's always great when someone wants you show off your work!!!!!
Great Job
Great Job
-
- Vectric Wizard
- Posts: 669
- Joined: Thu Apr 15, 2010 10:03 pm
- Model of CNC Machine: SHOPBOT BUDDY PRS 32, 4 FT PWR STICK
- Location: SOUTH CENTRAL COLORADO
Re: Design & Carve Projects and Scenes
i need a sky scene such as in your first and last pictures. were they part of the original artwork, did you make them or buy them. if there is a link to find them at please let me know.
by the way very nice
by the way very nice
- andyb
- Vectric Wizard
- Posts: 301
- Joined: Fri Jun 02, 2006 2:11 am
- Model of CNC Machine: MultiCAM, Shopbot PRTAlpha
- Location: Oakwood, GA
- Contact:
Re: Design & Carve Projects and Scenes
RoutnAbout,
Thanks for the comments.
Cowboy,
The sky was already part of the scene. If you have the scenes and Aspire you can cookie cut them and then try to use them.
Andy B.
Thanks for the comments.
Cowboy,
The sky was already part of the scene. If you have the scenes and Aspire you can cookie cut them and then try to use them.
Andy B.
[b]Oak Branch Manufacturing[/b]
andy@oakbranchmfg.com
678-971-5502
[url]http://www.oakbranchmfg.com[/url]
andy@oakbranchmfg.com
678-971-5502
[url]http://www.oakbranchmfg.com[/url]