Design & Carve Projects and Scenes

Discussions and examples relating to the Design & Carve series for Aspire

Moderator: JamesB

Design & Carve Projects and Scenes

Postby andyb » Fri Oct 14, 2011 3:59 am

Here are some things that I cut from the Design & Carve packages to sale at a local festival. We got a lot of comments on the carvings. We were asked by a promoter for another festival to participate in their November festival to show our work.

The Forrest, Mountain and Waterfall scenes were all cut with a 1/4" ballnose. We attached a frame around them then stained. Quick note on the Mountain Scene, the carving has lines in it like the stepover was set to high. Not sure why but the effect is really neat if you see it in person.

The Cattle Drive scene is a coat rack. Cut with a 1/8" ballnose. Will left the hangers off to offer the purchaser to pick between several different styles of hooks that we had.

We had two of the Cowboy Fences. One we added hooks to for a key rack. Both cut with an 1/8" ballnose.

The Leafman is 1.5" thick Maple. Cut with an 1/8" ballnose.

Andy B.
Attachments
Forrest Scene.JPG
Waterfall-Stream Scene.jpg
Cattle Drive Scene.jpg
Cowboy Fence.jpg
LeafMan.JPG
Mountain Scene Carving.JPG
[b]Oak Branch Manufacturing[/b]
andy@oakbranchmfg.com
678-971-5502
[url]http://www.oakbranchmfg.com[/url]
User avatar
andyb
Vectric Wizard
 
Posts: 300
Joined: Fri Jun 02, 2006 2:11 am
Location: Oakwood, GA
Model of CNC Machine: MultiCAM, Shopbot PRTAlpha

Re: Design & Carve Projects and Scenes

Postby RoutnAbout » Fri Oct 14, 2011 4:14 am

As always Andy, they look great, and it's always great when someone wants you show off your work!!!!!
Great Job
Roll of Honor <-- Never Forget
________
Don
User avatar
RoutnAbout
Vectric Wizard
 
Posts: 2075
Joined: Mon Sep 19, 2005 11:09 pm
Location: North Manchester, Indiana
Model of CNC Machine: Old Bot with a Rope Pull Start Spindle

Re: Design & Carve Projects and Scenes

Postby COWBOY1296 » Fri Oct 14, 2011 1:39 pm

i need a sky scene such as in your first and last pictures. were they part of the original artwork, did you make them or buy them. if there is a link to find them at please let me know.

by the way very nice
COWBOY1296
Vectric Wizard
 
Posts: 635
Joined: Thu Apr 15, 2010 10:03 pm
Location: SOUTH CENTRAL COLORADO
Model of CNC Machine: SHOPBOT BUDDY PRS 32, 4 FT PWR STICK

Re: Design & Carve Projects and Scenes

Postby andyb » Sat Oct 15, 2011 1:22 am

RoutnAbout,
Thanks for the comments.

Cowboy,
The sky was already part of the scene. If you have the scenes and Aspire you can cookie cut them and then try to use them.

Andy B.
[b]Oak Branch Manufacturing[/b]
andy@oakbranchmfg.com
678-971-5502
[url]http://www.oakbranchmfg.com[/url]
User avatar
andyb
Vectric Wizard
 
Posts: 300
Joined: Fri Jun 02, 2006 2:11 am
Location: Oakwood, GA
Model of CNC Machine: MultiCAM, Shopbot PRTAlpha


Return to Design & Carve - Aspire

Who is online

Users browsing this forum: No registered users and 1 guest