shark basic panel
shark basic panel
i thank there is a updated ver.of the control panel. for the shark could some one point me in the right way. thanks for anny help
-
spinningwood
- Vectric Wizard
- Posts: 338
- Joined: Wed Aug 12, 2009 2:09 am
- Model of CNC Machine: Taig Mill and Self Built Routers
- Location: Space Coast, Florida
Re: shark basic panel
This web site is a support forum for Vectric software products. In your case, most likely, this would be a good place to ask any questions you have about the VCarve software that came with your shark.
The control program for the shark is provided by NextWave Automation, the manufacturer of the shark. The shark is sold by Rockler. Rockler and Nextwave have a support forum that would be a great place to post questions about the shark control program.
You should find your answer at one or more of the following:
Shark software download ---> http://nextwaveautomation.com/DownLoads.aspx
Shark support forum ---> http://cncsharktalk.com/viewforum.php?f=2
Rockler tech support number ---> 1-800-279-4441 (only if you bought from Rockler and only during business hours)
Ed
The control program for the shark is provided by NextWave Automation, the manufacturer of the shark. The shark is sold by Rockler. Rockler and Nextwave have a support forum that would be a great place to post questions about the shark control program.
You should find your answer at one or more of the following:
Shark software download ---> http://nextwaveautomation.com/DownLoads.aspx
Shark support forum ---> http://cncsharktalk.com/viewforum.php?f=2
Rockler tech support number ---> 1-800-279-4441 (only if you bought from Rockler and only during business hours)
Ed